Toymods Car Club
www.toymods.org.au
F.A.Q. F.A.Q.    Register Register    Login Login    Home Home
Members Members    Search Search
Toymods » Tech & Conversions » 18RG ignition timing

Show: Today's Posts  :: Show Polls 
Email to friend  		Switch to threaded view of this topic Create a new topic Submit Reply
AuthorTopic
MyCel
Occasional Poster


Location:
melbourne/ vic
Registered:
August 2005
18RG ignition timing Tue, 20 September 2005 14:27 Go to next message
can someone help me out here

I need a pic to show where the leads got

I know the timing is 1-3-4-2 but where does the number 1 lead go on the distibutor cap?

is it number 1 at the top left of the distributor cap and then going clockwise from there is it 3-4-2?

if this makes sense to anyone can you help me out thanks

Jay
  Send a private message to this user    
TA-022
Forums Junkie


I Supported Toymods

Location:
Glenmore Park, NSW
Registered:
March 2004
Re: 18RG ignition timing Tue, 20 September 2005 23:47 Go to previous messageGo to next message
x-zack-eray!

1342 using 1 on the cap and running clockwise.

if in doubt pull the cap of and see which way the rotor button spins...should be clock wise.

damn i remember doing the 2t and hooking em up 1234... couldnt for the life of me work out why it was backfiring out the carb.

me fater inlaw had fun with that! lol
  Send a private message to this user    
jeffro RA28
Regular


Location:
Tamworth
Registered:
August 2004
Re: 18RG ignition timing Wed, 21 September 2005 10:17 Go to previous messageGo to next message
take the spark plug out of the number 1 cylinder(front most).

Crank the engine till the piston becomes TDC. Check with a peice of wire or a torch if u wish.

Then pull off the dizzy cap and see where the rotor is in relation to where the cap should be.
  Send a private message to this user    
omegaman
Regular


Location:
SYDNEY
Registered:
August 2003
Re: 18RG ignition timing Wed, 21 September 2005 10:42 Go to previous messageGo to next message
http://img377.imageshack.us/img377/1/lwf0006copy6cm.th.jpg
as stated and as shown in diag. no.1 lead
also make sure piston is at top dead ctr. do a test turn of engine to make sure its not 180 deg out.
  Send a private message to this user    
tricky
Regular


Location:
Canberra
Registered:
July 2005
Re: 18RG ignition timing Wed, 21 September 2005 13:08 Go to previous message
The easy way to check the piston is at TDC is too look at the timing marks Rolling Eyes As said above, firing order is spoton, and 1 is top left. Dizzy sense of rotation is c/w.
  Send a private message to this user    
  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic:Engineers for Eng Cert
Next Topic:Repositioning?
Goto Forum:
-=] Back to Top [=-

Current Time: Wed May 15 03:14:39 UTC 2024

Total time taken to generate the page: 0.0067391395568848 seconds

Bandwidth utilization bar

.:: Contact :: Home ::.

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.