Author | Topic |
Location: Hawthorn, Vic
Registered: March 2005
|
Ae82 Front wheel hub torque value
|
Thu, 22 September 2005 00:22
|
|
hey guys,
just a quickie.
On the front wheel hubs on an ae82, how tight should the centre nut be?
tight as a bitch? or tighten it up like hell, then back off a 1/2, 1.4 turn??? or is there a specific torque it needs to be???
ive previusly done it right up tight, then backed of 1/4 turn or so.
but talking to a mechanic, they do it right up with a rattle gun.
also mumbled something about the ae82 hubs needed to be bolted tight to the axle.
anyone have any idea?
cheers!
|
|
|
Location: Melb VIC
Registered: December 2003
|
|
|
Location: Adelaide
Registered: July 2002
|
Re: Ae82 Front wheel hub torque value
|
Thu, 22 September 2005 04:48
|
|
i used a 1m steel bar and good socket set to undo mine and still bent the bloody rachet handle. When i did it backup i almost lifted the bloody thing off the ground, bent the handle on the rachet back tho in short if you dont want your wheel to come off do it up toight loike a toiger
|
|
|
Location: Hawthorn, Vic
Registered: March 2005
|
Re: Ae82 Front wheel hub torque value
|
Thu, 22 September 2005 06:49
|
|
fair enough
tight as buggery it is
cheers!
|
|
|
Location: Newcastle
Registered: July 2003
|
Re: Ae82 Front wheel hub torque value
|
Thu, 22 September 2005 09:05
|
|
one of the ones in the mr2 taking it off i had the breaker bar then a 1.5m steel pole over that and it only let go after a fair bit of provocation.
bent the crap outa the iron pole
|
|
|