Author | Topic |
Location: Brisbane
Registered: May 2002
|
Low ratios for F series
|
Mon, 26 September 2005 02:35
|
|
I have a friend who wants to do an F series diff conversion in his Fiat, but he needs a final drive ratio of 4.3:1 or lower. Does anyone know where you could find a gearset this low? All I could think of was the Hilux Surf (front diff is F series), but I have a feeling the gearset won't work in a rear diff.
Any other suggestions?
|
|
|
Location: Rosanna, Melb
Registered: June 2002
|
Re: Low ratios for F series
|
Mon, 26 September 2005 03:18
|
|
4.3 in:
1989 2.2litre 4YE Tarago - Seen build plate.
Some form of old Soarer, maybe GZ20??? - Read on internet
There is a great thread that lists heaps of F-series info and what they all came from too.
Hen
|
|
|
I supported Toymods
Location: I renounced punctuation
Registered: May 2002
|
Re: Low ratios for F series
|
Mon, 26 September 2005 04:36
|
|
Some of the G powered soarers ahve 4.3 or possibly 4.5:1 ratios - I know for a fact they exist - friend has a 4.6:1 gearset in his F series diff.
|
|
|
Location: Brisbane
Registered: May 2002
|
Re: Low ratios for F series
|
Mon, 26 September 2005 04:53
|
|
http://forums.toymods.org.au/index.php?t=msg&t h=33561&rid=689&S=0a812a4d47756ce8c9a30bf9 bd26d5b7&pl_view=&start=0#msg_312508
I would also like to add to that, RT142 Auto (1986) was 3.727 (no build plate), and drive.com.au lists manuals as being 3.42 (F382?)... interesting.
But it looks like Norbies friend will be after the following at least, I suggest MS123 as the easiest to find out of that bunch?...(also worth a note, MS123's do have a different diff casing to say MA61/RA65 )
4.30 - GA61 Celica XX manual(F285)LSD
4.30 - MS123 Crown auto(F282)
4.556 - MA63 Supra auto(EDM?) (F252)
4.75 - MS57 Crown auto(F??2 - no build plate fitted)
4.778 - MS110 crown auto(F362)
|
|
|
Location: Lost in the K hole
Registered: May 2002
|
|
|
Location: Brisbane
Registered: May 2002
|
Re: Low ratios for F series
|
Mon, 26 September 2005 05:16
|
|
Thanks guys, that's some useful info. The Tarago is especially interesting, it might even be the correct width for the Fiat!
|
|
|
Location: Canberra
Registered: May 2002
|
Re: Low ratios for F series
|
Tue, 27 September 2005 01:10
|
|
Hiya Norbie, got a scrap of paper on my desk, tells me the "F" series diff n the RV Tarago is 1390mm. (me thinks, that is damn close to the HiLux)I remember measuring the Tarago about 18 months ago.
cheers Chuck.
|
|
|
Location: sunny coast, qld
Registered: October 2002
|
Re: Low ratios for F series
|
Tue, 27 September 2005 06:34
|
|
ed_ma61 wrote on Mon, 26 September 2005 14:54 | 4.556:1 out of the M-TEU MA63 Celica XX (manual)
that one's going behind the 2jz
|
Why? Do you want to enter burnout competitions?
|
|
|
Location: Pine Rivers QLD
Registered: April 2005
|
Re: Low ratios for F series
|
Tue, 27 September 2005 12:15
|
|
hey norbie i am running a F282 in my z10 soarer atm (as you will find most z20 soarers run G series diff's i believe) I will swap you for that LSD you got
|
|
|
I supported Toymods
Location: Australia
Registered: November 2003
|
Re: Low ratios for F series
|
Wed, 28 September 2005 03:08
|
|
Chris Davey wrote on Tue, 27 September 2005 14:34 |
ed_ma61 wrote on Mon, 26 September 2005 14:54 | 4.556:1 out of the M-TEU MA63 Celica XX (manual)
that one's going behind the 2jz
|
Why? Do you want to enter burnout competitions?
|
Ed is going to become the hillclimb king IIRC.
|
|
|
Location: sunny coast, qld
Registered: October 2002
|
Re: Low ratios for F series
|
Wed, 28 September 2005 03:14
|
|
That makes a bit of sense then
|
|
|
Location: Lost in the K hole
Registered: May 2002
|
Re: Low ratios for F series
|
Wed, 28 September 2005 03:33
|
|
CrUZsida wrote on Wed, 28 September 2005 13:08 |
Chris Davey wrote on Tue, 27 September 2005 14:34 | Why? Do you want to enter burnout competitions?
|
Ed is going to become the hillclimb king IIRC.
|
or i could do both - just sit on the line making smoke...
|
|
|