Author | Topic |
I supported Toymods
Location: melbourne
Registered: June 2002
|
|
|
Location: sydney, nearest store nea...
Registered: November 2004
|
Re: EOI: parting out FWD bluetop 4AGE
|
Mon, 19 September 2005 00:36
|
|
i think you posted this in the wrong section
|
|
|
Location: Melbourne
Registered: November 2004
|
Re: EOI: FWD bluetop 4AGE electrical bits
|
Tue, 20 September 2005 19:29
|
|
have u got a throttle body sensor
|
|
|
I supported Toymods
Location: melbourne
Registered: June 2002
|
Re: EOI: FWD bluetop 4AGE electrical bits
|
Thu, 29 September 2005 11:44
|
|
sorry, no TPS
|
|
|
Location: Melbourne - NthSubs
Registered: January 2004
|
Re: EOI: FWD bluetop 4AGE electrical bits
|
Fri, 30 September 2005 06:27
|
|
i think kev needs an ignitor and map sensor?
|
|
|
I supported Toymods
Location: melbourne
Registered: June 2002
|
Re: EOI: FWD bluetop 4AGE electrical bits
|
Fri, 30 September 2005 13:10
|
|
WTF is a kev?
have MAP, have some kinf of ignitor, had it on my engine for a while, it ran but not as good as with a smallport ignitor
|
|
|
Location: Melbourne - NthSubs
Registered: January 2004
|
Re: EOI: FWD bluetop 4AGE electrical bits
|
Fri, 30 September 2005 13:15
|
|
kev = phrostbyte
i sent him the link
|
|
|
I supported Toymods
Location: Frankston, Victoria
Registered: April 2004
|
Re: EOI: FWD bluetop 4AGE electrical bits
|
Fri, 30 September 2005 13:32
|
|
kev = me
Cheers Leo.
I did PM you about a week ago about it Shinybluesteel. I need MAP sensor, ignitor, a dizzy plug (loom side), the injectors if they have seals that are still in-tact, the banjo bolts required to connect the fuel rail to the fuel line and the bolts + spacers that hold the fuel rail on.
Will pay $120+post for all that stuff. Get back to me.
Cheers,
Kev.
|
|
|
I supported Toymods
Location: melbourne
Registered: June 2002
|
Re: EOI: FWD bluetop 4AGE electrical bits
|
Fri, 30 September 2005 13:53
|
|
OK dude, i'll have a look and get back to ya.
by seals you mean the o-rings that seal them in the head right? think they aren't in great condition.
some parts might be spoken for/missing, but i'll let you know what i have.
|
|
|
I supported Toymods
Location: Frankston, Victoria
Registered: April 2004
|
|
|
I supported Toymods
Location: Perth
Registered: October 2003
|
Re: EOI: FWD bluetop 4AGE electrical bits
|
Sat, 01 October 2005 11:28
|
|
buy them new.. orings for the injectors that is, also get ya injectors cleaned out, if you havent already done this.
|
|
|
I supported Toymods
Location: Frankston, Victoria
Registered: April 2004
|
Re: EOI: FWD bluetop 4AGE electrical bits
|
Sat, 01 October 2005 13:04
|
|
Meh, rather get them second hand if they aren't in bad condition, alot of trouble and extra cost to get them new. I know it's a risk, but i have a permanent fire extinguisher in my car anyway, add to that this is only a temporary engine and i have a 4agze to build up and turbo on its way soon, and that will have brand spanking injectors...
Kev.
|
|
|
Location: Melbourne - NthSubs
Registered: January 2004
|
Re: EOI: FWD bluetop 4AGE electrical bits
|
Sat, 01 October 2005 16:06
|
|
he lives in a land far far away
i should have sent u those bosch sparkplugs also
anyways... might need the tps?
|
|
|
I supported Toymods
Location: melbourne
Registered: June 2002
|
Re: EOI: FWD bluetop 4AGE electrical bits
|
Sun, 02 October 2005 09:00
|
|
no TPS, sorry
|
|
|
I supported Toymods
Location: Frankston, Victoria
Registered: April 2004
|
Re: EOI: FWD bluetop 4AGE electrical bits
|
Sun, 02 October 2005 13:06
|
|
pm'd again
|
|
|