Toymods Car Club
www.toymods.org.au
F.A.Q. F.A.Q.    Register Register    Login Login    Home Home
Members Members    Search Search
Toymods » Tech & Conversions » Stereo into Ta22

Show: Today's Posts  :: Show Polls 
Email to friend 
Switch to threaded view of this topic Create a new topic Submit Reply
AuthorTopic
riceburna73
Forums Junkie


Location:
Sydney
Registered:
April 2004
Stereo into Ta22 Mon, 03 October 2005 08:01 Go to next message
Ok very very sorry for such a crappy noob question and yes I have searched..Im trying to put in a clarion DRB3375 head deck into my missus 73 and its got me stuffed,

Unfortunately I didnt get the car with a stereo already in it,all it has is a yellow wire with a fuse holder on it and a red wire with another smaller plastic thing and a wire for the arial.I have a sneeky suspicion that those wires arent enough to run a stereo.

Now the old clarion cd player has the following.

Yellow wire with fuse
Blue wire with fuse holder(no fuse)
red
black
2 green
2 purple
2 white(one with black stripe)
2 grey(one with black stripe)

Any help greatly appreciated, and yes I am a bit slow!!
  Send a private message to this user    
Dale_ta22
Regular


Location:
Forster NSW
Registered:
September 2004
Re: Stereo into Ta22 Mon, 03 October 2005 09:08 Go to previous messageGo to next message
Best thing to do is to run a brand spanking new +12v from the battery, or optionally from the ignition barrell depending on which way inclined you are.
Then all you'll need is the ACC wire, which by memory is a blue with a white stripe, or something similar. Check it with a multimeter or test light to see if it comes on when the ignition is turned to ACC.
Ground it to a clean point on the chasis and since it has no stereo currently run your new speaker wire. Unless you want to use the speaker mounted up under the dash Cool
  Send a private message to this user    
Dale_ta22
Regular


Location:
Forster NSW
Registered:
September 2004
Re: Stereo into Ta22 Mon, 03 October 2005 09:18 Go to previous message
riceburna73 wrote on Mon, 03 October 2005 18:01


Now the old clarion cd player has the following.

Yellow wire with fuse
Blue wire with fuse holder(no fuse)
red
black
2 green
2 purple
2 white(one with black stripe)
2 grey(one with black stripe)

Any help greatly appreciated, and yes I am a bit slow!!


Out of those

Yellow = +12v constant
Blue = remote/power antenna (likey not needed, usually have a bullet type connector on them)
Red = ACC
black = ground

Green = Rear Left +
Green/black = Rear Left -

Violet = Rear right +
Violet/black = Rear right -

White = Front left +
White/black = Front left -

Gray = Front right +
Gray/black = Front right -
  Send a private message to this user    
  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic:3T dizzy vacuum advance - How does it work?
Next Topic:3k no spark
Goto Forum:
-=] Back to Top [=-

Current Time: Fri May 17 22:51:47 UTC 2024

Total time taken to generate the page: 0.0048902034759521 seconds

Bandwidth utilization bar

.:: Contact :: Home ::.

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.