Author | Topic |
Location: Tassie
Registered: October 2003
|
1ggte gen 2 vs gen 3
|
Thu, 20 October 2005 13:05
|
|
what are the differences between the two ?
i've been told it's only ecu,injectors,cams and turbos
is this true ?
if i swap the above parts from my blown gen 3 into a gen two should it still crank the 210 at the fly ??
thanks heaps mookie
|
|
|
Location: Tassie
Registered: October 2003
|
Re: 1ggte gen 2 vs gen 3
|
Fri, 21 October 2005 01:43
|
|
I've got a bleed valve so i can bring it back up to 14 psi
|
|
|
I supported Toymods
Location: Australia
Registered: November 2003
|
Re: 1ggte gen 2 vs gen 3
|
Fri, 21 October 2005 06:40
|
|
You searched this?
I'm sure its been covered eleventy billion times before.
|
|
|
Location: Hobart, Tas
Registered: May 2002
|
Re: 1ggte gen 2 vs gen 3
|
Sat, 22 October 2005 07:32
|
|
It kind of has, but not definitively. From what I've read the differences are only cam, ecu, loom, injectors, turbos (and manifold slightly different), but he needs confrimation on this
|
|
|
Location: Tassie
Registered: October 2003
|
Re: 1ggte gen 2 vs gen 3
|
Sat, 22 October 2005 07:51
|
|
Yeah from what i read there was some info about it.
but there was no definate answer.
i just don't want to put all the gen 3 stuff on a gen 2 1ggte and find it dissapointing.
Mookie
|
|
|