| Author | Topic |
|---|
Registered:
June 2004
|
|
what flywheel for manual 1UZ?
|
Tue, 25 October 2005 08:14
|
 |
i just got a 1UZ without a gearbox, so rather than sourcing an auto and forking out lots of money to get it and ship it, i'm converting it. from what i've been told, a later model hilux(2.8d) might fit, of course i'll have modify it for the ring gear.
anybody know of any that will fit, keeping in mind that i'm gonna need to use a heavy duty clutch like a hilux one.
also, which model comes with the rear sump?
the motor i got says ls400 on the computer, and one of the loom plugs are cut, assumably the loom to the auto computer, suggesting it is an ls400 motor, but i thought they were the models with rear sump!?
any help greatly appreciated, oh and anybody in tassie got a w58 g/box?
|
|
|
Location:
sydney
Registered:
March 2003
|
|
Re: what flywheel for manual 1UZ?
|
Tue, 25 October 2005 08:19
|
|
to go manual costs about 2000
to find anothr auto is about 500 bucks
the manual bellhousing and stuff costs about 1400
and for agood supra box is about 400 to 600 maybe
|
|
|
Registered:
June 2004
|
|
Re: what flywheel for manual 1UZ?
|
Tue, 25 October 2005 08:34
|
|
as if i'm gonna pay 1400 for a bloody bell housing, i'm not getting it adapted by dellow or castlemaine, i can do it at work.
if anyone can comfirm the flywheel i'll be happy cuz i already got a free clutch to suit.
|
|
|
Registered:
June 2004
|
|
Re: what flywheel for manual 1UZ?
|
Tue, 25 October 2005 08:44
|
|
|
also, about the computer, do i need to get a plug-in or something so that it runs without the gearbox or are they independant of each other?
|
|
|
Location:
sydney
Registered:
March 2003
|
|
Re: what flywheel for manual 1UZ?
|
Tue, 25 October 2005 08:59
|
|
well u must have super human talents then hehe
not many people know what the fluywheel is
they usually get one in the kit supplied
and i think it is usually custom made
i think u have to remove the ring gear of the flew plate and fit it to the flywheel these guys supply with the bell housing kit
|
|
|
Registered:
June 2004
|
|
Re: what flywheel for manual 1UZ?
|
Tue, 25 October 2005 09:08
|
|
it's not that hard, the hardest part is the measurements!
by the way, has anybody got any measurements of an auto box?
|
|
|
I supported Toymods
Location:
Australia
Registered:
November 2003
|
|
Re: what flywheel for manual 1UZ?
|
Tue, 25 October 2005 09:09
|
|
As sideshow said, its about $2000 to convert to manual.
$500 for gearbox
$500 for bellhousing
$500 for clutch
$500 for flywheel
(give or take $100 per item, depending on what you get).
afaik NOTHING fits straight up.
Its all custom.
If you wish to modify/redrill another flywheel, then you are an idiot.
There are at least 4 places I know of that do custom flywheels.
Search Toymods, its all out there.
|
|
|
I supported Toymods
Location:
Australia
Registered:
November 2003
|
|
Re: what flywheel for manual 1UZ?
|
Tue, 25 October 2005 09:10
|
|
Oh, and having an ECU plug cut is bad.
The ecu controls the auto and the motor, so you'll need all the plugs.
|
|
|
Location:
sydney
Registered:
March 2003
|
|
Re: what flywheel for manual 1UZ?
|
Tue, 25 October 2005 10:34
|
|
i think the loom on an ls400 has 3 plugs on the enigne main loom
and the 4th plug goes thru the dash and to other sections on the car and also to the auto gbox
unless u have the wiring lom and u can see the cut wires
but from past experiences there is always an extra plug that goes to the dash section and not the eninge harness
i have a made up ls400 loom here i can check to see how it all goes
|
|
|
Location:
Sydney
Registered:
May 2002
|
|
|
I supported Toymods
Location:
Australia
Registered:
November 2003
|
|
Re: what flywheel for manual 1UZ?
|
Tue, 25 October 2005 11:57
|
|
I suppose yeah.
But its made for a H151F, so it will be a heavy fucker.
|
|
|
Registered:
June 2004
|
|
Re: what flywheel for manual 1UZ?
|
Wed, 26 October 2005 08:33
|
|
thanks, sideshow, that'll help.
it's got all the plugs, except the one that doesn't appear to have been from the motor is cut. if you could tell me which colours go where i'd be able to trick the motor or something.
and for your information cruzsida, i've found a flywheel that fits so get stuffed!! 
i've already got the clutch, so i'm half way already.
|
|
|
I supported Toymods
Location:
Australia
Registered:
November 2003
|
|
Re: what flywheel for manual 1UZ?
|
Wed, 26 October 2005 08:36
|
|
| joecoolmk2 wrote on Wed, 26 October 2005 16:33 |
and for your information cruzsida, i've found a flywheel that fits so get stuffed!!
|
Care to share?
Was it the 2.8D you mentioned?
|
|
|
Registered:
June 2004
|
|
Re: what flywheel for manual 1UZ?
|
Wed, 26 October 2005 08:39
|
|
i'm not telling!
|
|
|
I supported Toymods
Location:
Australia
Registered:
November 2003
|
|
Re: what flywheel for manual 1UZ?
|
Wed, 26 October 2005 08:39
|
|
Thats the Toymods Spirit I like to see 
|
|
|
Location:
sydney
Registered:
March 2003
|
|
Re: what flywheel for manual 1UZ?
|
Wed, 26 October 2005 08:47
|
|
send me yr loom and ill fix it for a price heheh
its not something i give out
find some diagrams and wire it up
it take me 8 to 10 hours to do the job from scratch so for a novice i dont know how long
i do this for a living so i do not hand out any diagrams
and am limited to what info i give out on the net
sorry
but its not a 5 minute job where i can say do this and that
|
|
|
I supported Toymods
Location:
Perth, Western Australia
Registered:
December 2002
|
|
Re: what flywheel for manual 1UZ?
|
Wed, 26 October 2005 10:15
|
|
| joecoolmk2 wrote on Wed, 26 October 2005 16:39 |
i'm not telling!
|
Don't ask for help ever again then - what a cock!
|
|
|
I supported Toymods
Location:
I renounced punctuation
Registered:
May 2002
|
|
Re: what flywheel for manual 1UZ?
|
Wed, 26 October 2005 10:44
|
|
|
Another to the ignore list.
|
|
|
Location:
logan river brisbane
Registered:
July 2005
|
|
Re: what flywheel for manual 1UZ?
|
Wed, 26 October 2005 15:38
|
|
|
JOE COOL
|
|
|
Location:
logan river brisbane
Registered:
July 2005
|
|
|
