Author | Topic |
Location: sydney
Registered: October 2005
|
front mount for 4agze
|
Wed, 26 October 2005 14:47
|
|
hey guys,
i was thinking of placing a front mount intercooler on my JDM 4agze AFM in an ae92 and taking out the stock topmount.
What size intercooler should i be looking at and what pipping??
My mate has a stock intercooler from a r32 gtr, would i be able to used that?
i have also read about the engine stalling after installing a front mount due the the pipping is this true? how can i overcome this??
any suggestions would be appreciated!
thanks
dug
|
|
|
Location: Adelaide
Registered: September 2004
|
Re: front mount for 4agze
|
Wed, 26 October 2005 22:21
|
|
The piping would be longer, but 4agze into Sprinter conversions all use front mounts without probs. The stock intercooler works fine. If you plan to run huge amounts of boost then go for the GTR intercooler, but otherwise would probably be too much trouble to fit such a big one...
|
|
|
Location: Toronto, Downtown
Registered: September 2004
|
Re: front mount for 4agze
|
Wed, 26 October 2005 23:10
|
|
ditch the stocker if you can especially in smallport form they are tiny something like a 1ggte core will work well
|
|
|
Location: Batemans Bay, NSW
Registered: February 2005
|
Re: front mount for 4agze
|
Wed, 26 October 2005 23:38
|
|
yeh lad, get the gtr core.. they work well and should do the job nicely.. or u could get a VR4/supra core.... man' even brand new 600x300x75mm cores can be had for as low as $270... The Gze wouldnt need such a big core, but still its worth considering...
a second throttle body may be needed to break up the length of the piping in some instances' but its unlikely..
piece...
|
|
|
Location: sydney
Registered: October 2005
|
Re: front mount for 4agze
|
Thu, 27 October 2005 05:38
|
|
so would it be okay for me to put the front mount on the AFM 4agze with no probs?
dug
|
|
|
Location: Melbourne - NthSubs
Registered: January 2004
|
Re: front mount for 4agze
|
Thu, 27 October 2005 05:41
|
|
i got a vr4 for the stock 4a twinky
|
|
|
Location: sydney
Registered: March 2005
|
Re: front mount for 4agze
|
Thu, 27 October 2005 08:37
|
|
how much for the vr4 ?
|
|
|
Location: sydney
Registered: October 2005
|
Re: front mount for 4agze
|
Fri, 28 October 2005 00:06
|
|
??
|
|
|
Location: Melbourne - NthSubs
Registered: January 2004
|
|
|
Location: sydney
Registered: March 2005
|
Re: front mount for 4agze
|
Fri, 28 October 2005 04:14
|
|
o ok
|
|
|
Location: sydney
Registered: October 2005
|
Re: front mount for 4agze
|
Mon, 31 October 2005 12:10
|
|
i'm going ahead and placing the stock r32 gtr intercooler on my ae92 4agze AFM this weekend and just wondering what size pipe to use and do i use the same size pipe all the way??
any ideas or help would be appreciated!
thanks
dug
|
|
|
Location: parra
Registered: June 2005
|
Re: front mount for 4agze
|
Tue, 01 November 2005 01:06
|
|
wouldnt there be problems with that extra piping my friends car ended up going worse when he ditched the top mount taking too long to boost or something mind you his piping from the supercharger was pretty dicey
|
|
|
I supported Toymods
Location: Adelaide
Registered: July 2004
|
Re: front mount for 4agze
|
Tue, 01 November 2005 02:42
|
|
$179 for hybrid copy IC
cant go wrong
|
|
|
Location: sydney
Registered: October 2005
|
Re: front mount for 4agze
|
Tue, 01 November 2005 03:44
|
|
yes i have read some posts about that but there's a number of people that had fmic without losing boost and i don't know why, would it be because their pipping have leaks?can anyone shed some light here?
do you mean an topmount hybrid ic or front?
where can i get those at??
|
|
|
I supported Toymods
Location: Adelaide
Registered: July 2004
|
Re: front mount for 4agze
|
Tue, 01 November 2005 03:55
|
|
www.nissansilvia.com
check the sponsors section
heaps of deals on FMIC's there
|
|
|
Location: Adelaide
Registered: May 2003
|
Re: front mount for 4agze
|
Tue, 01 November 2005 04:22
|
|
If you frontmount an IC on a GZE then welcome to the club of the neverending idle adjustments.
|
|
|
Location: Sydney
Registered: May 2003
|
Re: front mount for 4agze
|
Tue, 01 November 2005 06:52
|
|
if your putting a 600 300 75 cooler in a ae92 sx thats what it is going to look like farking huge.
when i was supercharged and i had the front mount i had stalling and idel probs all the time. I think was due to lengths of the cooler pipes not sure never fixed the problem just went turbo.
|
|
|
Location: sydney
Registered: October 2005
|
Re: front mount for 4agze
|
Tue, 01 November 2005 08:49
|
|
is there anyway to get a FMIC setup without the car stalling or problems with the idling??
|
|
|
Location: sydney
Registered: October 2005
|
Re: front mount for 4agze
|
Tue, 01 November 2005 11:28
|
|
anyone?
|
|
|
Location: Sydney
Registered: May 2003
|
Re: front mount for 4agze
|
Tue, 01 November 2005 11:58
|
|
not that i know of
|
|
|
Location: NSW
Registered: July 2004
|
Re: front mount for 4agze
|
Thu, 03 November 2005 06:17
|
|
mine has a front mount not as big as flynsx but still good size and i have never had a problem with it stalling or idleing funny
|
|
|
Location: Melbourne - NthSubs
Registered: January 2004
|
Re: front mount for 4agze
|
Thu, 10 November 2005 23:46
|
|
i know this is a bit old, but i never had idle or stalling problems with my vr4 intercooler but does take longer to boost
with the top mount it boost stright away while the fmic boosts from 3000+...
|
|
|
Registered: May 2002
|
Re: front mount for 4agze
|
Fri, 11 November 2005 00:04
|
|
Quote: | is there anyway to get a FMIC setup without the car stalling or problems with the idling??
|
My car never had any idle problems or stalling problems ever with the 4AGZE with 175mm pulley and front mount. Mine just had the piping kept short and the piping was 2" to 2.5" in diameter (pretty narrow compared to some). The front mount was custom made, I can't remember the dimensions. Everything else was stock including the ECU.
The gay thing with 4AGZEs and the throttle being pre-supercharger is that as you increase the volume between the throttle and cylinders with increased pipework and a larger intercooler the throttle response is decreased. You get used to it but it something to be aware of.
|
|
|
Location: sydney
Registered: October 2005
|
Re: front mount for 4agze
|
Tue, 15 November 2005 07:53
|
|
finally i got the intercooler on!!!!
BUT
my car now stalls everytime i stop even when i leave it to idle.
Is there anything i can do to fix this??
|
|
|
Location: sydney, nearest store nea...
Registered: November 2004
|
|
|