Toymods Car Club
www.toymods.org.au
F.A.Q. F.A.Q.    Register Register    Login Login    Home Home
Members Members    Search Search
Classifieds » Wheels, Tyres, Suspension and Brakes » Custom made low AE86 springs *PICS OF MY OLD AWESOME RIDE HEIGHT*

Show: Today's Posts  :: Show Polls 
Email to friend 
Switch to threaded view of this topic Create a new topic Submit Reply
AuthorTopic
shinybluesteel
Forums Junkie


I supported Toymods

Location:
melbourne
Registered:
June 2002
Custom made low AE86 springs *PICS OF MY OLD AWESOME RIDE HEIGHT* Thu, 10 November 2005 12:18 Go to next message
Selling the old springs from my car, had them custom made a while back.

about 2.5-3 inches lower than standard, way lower than king lows.

(have pics of my car with them, will post up soon)

fronts are captive with standard shocks, rears are nearly captive (about an inch gap at full droop, was never a problem for my car)

i would suggest cutting one section off your bumpstops for this ride height, especially on the front.

selling due to upgrade.

offers?

http://img180.imageshack.us/img180/714/mycarsidelow8gd.jpg

[Updated on: Sun, 13 November 2005 00:25]

  Send a private message to this user    
taitran
Regular


Location:
Melbourne, West Suburbs
Registered:
April 2005
Re: Super Dooper low AE86 springs Fri, 11 November 2005 00:02 Go to previous messageGo to next message
$50 pick-up Very Happy
  Send a private message to this user    
devolutio
Regular


Location:
Melbourne
Registered:
October 2004
Re: Super Dooper low AE86 springs Fri, 11 November 2005 02:26 Go to previous messageGo to next message
i'll offer $90 Confused
  Send a private message to this user    
shinybluesteel
Forums Junkie


I supported Toymods

Location:
melbourne
Registered:
June 2002
Re: Super Dooper low AE86 springs Fri, 11 November 2005 02:41 Go to previous messageGo to next message
cheers devo, i'll even install the rear ones for you.
  Send a private message to this user    
DRFTAE86
Regular


Location:
Melbourne: South east
Registered:
May 2004
Re: Super Dooper low AE86 springs Fri, 11 November 2005 07:17 Go to previous messageGo to next message
Spring rates.... how many KGs front and rear?
  Send a private message to this user    
shinybluesteel
Forums Junkie


I supported Toymods

Location:
melbourne
Registered:
June 2002
Re: Super Dooper low AE86 springs Fri, 11 November 2005 09:34 Go to previous messageGo to next message
no idea on rates, i'd say roughly the same as standard

[Updated on: Fri, 11 November 2005 09:35]

  Send a private message to this user    
shinybluesteel
Forums Junkie


I supported Toymods

Location:
melbourne
Registered:
June 2002
Re: Super Dooper low AE86 springs Sun, 13 November 2005 00:43 Go to previous messageGo to next message
bump, pic added
  Send a private message to this user    
Rallystanza
Forums Junkie


Location:
Melbourne
Registered:
May 2004
Re: Custom made low AE86 springs *PICS OF MY OLD AWESOME RIDE HEIGHT* Sun, 13 November 2005 00:45 Go to previous messageGo to next message
Pfft.

Thats not low Wink

But it is lower than the shit king springs.

Jez
  Send a private message to this user    
taitran
Regular


Location:
Melbourne, West Suburbs
Registered:
April 2005
Re: Custom made low AE86 springs *PICS OF MY OLD AWESOME RIDE HEIGHT* Sun, 13 November 2005 09:45 Go to previous messageGo to next message
So are these springs still available or sold?
  Send a private message to this user    
shinybluesteel
Forums Junkie


I supported Toymods

Location:
melbourne
Registered:
June 2002
Re: Custom made low AE86 springs *PICS OF MY OLD AWESOME RIDE HEIGHT* Sun, 13 November 2005 10:27 Go to previous messageGo to next message
still available
  Send a private message to this user    
taitran
Regular


Location:
Melbourne, West Suburbs
Registered:
April 2005
Re: Custom made low AE86 springs *PICS OF MY OLD AWESOME RIDE HEIGHT* Sun, 13 November 2005 10:44 Go to previous messageGo to next message
Whats the highest offer so far?, would these make my Streeter kitted Sprinter too low with 15" rims?.
  Send a private message to this user    
rthy
Forums Junkie


Location:
Melbourne - NthSubs
Registered:
January 2004
wtf is a jabber? a punch line?
Re: Custom made low AE86 springs *PICS OF MY OLD AWESOME RIDE HEIGHT* Sun, 13 November 2005 12:01 Go to previous messageGo to next message
wooo, that sits nice and low, something like superlows?
  Send a private message to this user    
shinybluesteel
Forums Junkie


I supported Toymods

Location:
melbourne
Registered:
June 2002
Re: Custom made low AE86 springs *PICS OF MY OLD AWESOME RIDE HEIGHT* Sun, 13 November 2005 22:45 Go to previous messageGo to next message
You can't get superlows for sprinters, they only do lows, and lows are about 1-2 inches higher than these springs.

taitran, the highest offer so far is 90 bucks, i'm not after a great deal more than that.

the wheels you see on there are 14 inch rims wearing 195/60 tyres (same outside diameter as standard). I didnt really scrape anything due to the sprinter's fairly short overhangs. had to slow down for speed humps, but thats what they are there for right?

at the lowest point it was 100 mm off the ground, if you have a front lip then you will have to watch out for gutters etc, occasionally my front tow hooks would scrape gutters in car parks, but thats about it.
  Send a private message to this user    
shinybluesteel
Forums Junkie


I supported Toymods

Location:
melbourne
Registered:
June 2002
Re: Custom made low AE86 springs *PICS OF MY OLD AWESOME RIDE HEIGHT* Mon, 14 November 2005 12:47 Go to previous messageGo to next message
whats the matter, don't you guys like the lay-dees? cause they will be all over you with this ride height Rolling Eyes Laughing
  Send a private message to this user    
rthy
Forums Junkie


Location:
Melbourne - NthSubs
Registered:
January 2004
wtf is a jabber? a punch line?
Re: Custom made low AE86 springs *PICS OF MY OLD AWESOME RIDE HEIGHT* Tue, 15 November 2005 00:01 Go to previous messageGo to next message
my ae82 has superlows and just sits 1-2cm above the wheel with 195/65/r14's

these look lower?
  Send a private message to this user    
shinybluesteel
Forums Junkie


I supported Toymods

Location:
melbourne
Registered:
June 2002
Re: Custom made low AE86 springs *PICS OF MY OLD AWESOME RIDE HEIGHT* Tue, 15 November 2005 07:13 Go to previous messageGo to next message
what?
  Send a private message to this user    
rthy
Forums Junkie


Location:
Melbourne - NthSubs
Registered:
January 2004
wtf is a jabber? a punch line?
Re: Custom made low AE86 springs *PICS OF MY OLD AWESOME RIDE HEIGHT* Tue, 15 November 2005 07:16 Go to previous messageGo to next message
ur car is low Razz
kings rrp at $140 per PAIR so good buy anyways
  Send a private message to this user    
shinybluesteel
Forums Junkie


I supported Toymods

Location:
melbourne
Registered:
June 2002
Re: Custom made low AE86 springs *PICS OF MY OLD AWESOME RIDE HEIGHT* Mon, 21 November 2005 22:36 Go to previous messageGo to next message
bump, had a buyer but he decided the springs were too cool for his car Razz
  Send a private message to this user    
shinybluesteel
Forums Junkie


I supported Toymods

Location:
melbourne
Registered:
June 2002
Re: Custom made low AE86 springs *PICS OF MY OLD AWESOME RIDE HEIGHT* Sat, 26 November 2005 09:04 Go to previous messageGo to next message
oops
  Send a private message to this user    
shinybluesteel
Forums Junkie


I supported Toymods

Location:
melbourne
Registered:
June 2002
Re: Custom made low AE86 springs *PICS OF MY OLD AWESOME RIDE HEIGHT* Thu, 08 December 2005 09:22 Go to previous messageGo to next message
bump, will probably take these to the dorifto
  Send a private message to this user    
devolutio
Regular


Location:
Melbourne
Registered:
October 2004
Re: Custom made low AE86 springs *PICS OF MY OLD AWESOME RIDE HEIGHT* Thu, 08 December 2005 22:58 Go to previous messageGo to next message
I've heard of stripping the interior for drift, but I think you need more than just the springs to slide... where would the cup-holder go?
  Send a private message to this user    
truenosedan1
Regular


Location:
Adelaide
Registered:
July 2005
Re: Custom made low AE86 springs *PICS OF MY OLD AWESOME RIDE HEIGHT* Fri, 09 December 2005 01:41 Go to previous messageGo to next message
rthy wrote on Tue, 15 November 2005 17:46

ur car is low Razz
kings rrp at $140 per PAIR so good buy anyways


off topic!

dude...i know you werent harming this sale but!
did i not tell you in another thread to STOP quoting "RRPs" etc. You have honestly quoted prices in about 5 threads now, and everytime you have been WRONG. unless you have a LIST price in front of you and you have added gst..... Shocked Razz

no hard feeling its just forums people seems to ALWAYS low ball

  Send a private message to this user    
rthy
Forums Junkie


Location:
Melbourne - NthSubs
Registered:
January 2004
wtf is a jabber? a punch line?
Re: Custom made low AE86 springs *PICS OF MY OLD AWESOME RIDE HEIGHT* Fri, 09 December 2005 04:26 Go to previous messageGo to next message
i was quoted that price Rolling Eyes

edit: will stop posting rrp, but this was quoted from supercheap auto (not sure if it had the 25% empolyee discount Wink )

[Updated on: Fri, 09 December 2005 04:44]

  Send a private message to this user    
shinybluesteel
Forums Junkie


I supported Toymods

Location:
melbourne
Registered:
June 2002
Re: Custom made low AE86 springs *PICS OF MY OLD AWESOME RIDE HEIGHT* Fri, 09 December 2005 22:06 Go to previous messageGo to next message
no fighting in my thread you little bastards! Laughing

[Updated on: Fri, 09 December 2005 22:07]

  Send a private message to this user    
truenosedan1
Regular


Location:
Adelaide
Registered:
July 2005
Re: Custom made low AE86 springs *PICS OF MY OLD AWESOME RIDE HEIGHT* Sat, 10 December 2005 12:36 Go to previous message
hahaha, its all shits and giggles Laughing
  Send a private message to this user    
  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic:MA61 Alloys $300 set Melb
Next Topic:Toyo 205/ 45 /16 TPG tyres 4 SALE
Goto Forum:
-=] Back to Top [=-

Current Time: Fri Mar 29 10:08:09 UTC 2024

Total time taken to generate the page: 0.0051240921020508 seconds

Bandwidth utilization bar

.:: Contact :: Home ::.

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.