Toymods Car Club
www.toymods.org.au
F.A.Q. F.A.Q.    Register Register    Login Login    Home Home
Members Members    Search Search
Toymods » Tech & Conversions » Engine oil flush

Show: Today's Posts  :: Show Polls 
Email to friend 
Switch to threaded view of this topic Create a new topic Submit Reply
AuthorTopic
vtm666
Regular


Location:
Melbourne
Registered:
June 2004
Engine oil flush Sun, 13 November 2005 08:49 Go to next message
hey guys
i want to put in some motul 300V oil into the engine which cost lots of $$$
just wanted to know if the nulon oil flush affects the new oil in anyway???
for example, add nulon oil flush into engine with old oil, drain and refill with new oil

if theres old oil mixed with the oil flush still in the engine, can this make the new oil change its properties like make it thin???

the stuff im using is in link below
http://www.nulon.com.au/prod_EOF_engine_oil_flush. htm
  Send a private message to this user    
Dale_ta22
Regular


Location:
Forster NSW
Registered:
September 2004
Re: Engine oil flush Sun, 13 November 2005 09:19 Go to previous messageGo to next message
Whatever's left is going to be VERY diluted by the time the new oil goes in, like a drop in a bucket, hardly enough to thin the oil I would imagine.

Feel free to correct me if I'm wrong though...
  Send a private message to this user    
Toobs
Forums Junkie


I Supported Toymods

Location:
Sydney
Registered:
December 2002
 
Re: Engine oil flush Sun, 13 November 2005 11:50 Go to previous messageGo to next message
Yep thats pretty much the case...
If you want to be 100% sure its gone just chuck in a fill worth of cheap multigrade oil and go for a lap around the block before adding your good oil.

When you're using the engine oil flush stuff just keep an eye on the oil pressure because if your engine / oil pump are getting on a bit your oil pressure could fall to a point that could damage the engine.
  Send a private message to this user    
rollaboy
Forums Junkie


Location:
Coffs
Registered:
May 2002
 
Re: Engine oil flush Sun, 13 November 2005 23:25 Go to previous message
The brand Inter-Ject works great.
http://www.interject.co.nz/interject/index.html
There are some dealers for it about.

They do from fuel system treatments to engine flush and cooling system flush. We use it at work and its great stuff.
  Send a private message to this user    
  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic:Stripped thread
Next Topic:my crank
Goto Forum:
-=] Back to Top [=-

Current Time: Thu Mar 28 20:23:33 UTC 2024

Total time taken to generate the page: 0.0032010078430176 seconds

Bandwidth utilization bar

.:: Contact :: Home ::.

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.