Location: agnes water qld
Registered: October 2005
2tgeu fuel pressure?
Fri, 25 November 2005 01:08
hi I'm putting an efi system on my 2tgeu and wanting to know how much pressure ill need to run. and what fuel pump i could use. Will a 070 vl do, or do i have to use some think better like a 910 bosh.
Your 2T-GEU should have a fuel pressure regulator, and it will take care of the fuel pressure for you. Practically any EFI fuel pump will do the job unless you have some pretty crazy mods.
most efi systems i've seen run 40psi. however not sure as to what 2t-g is. I'd be 90% sure it is though. if your running the std computer give it a shot at 40psi, if you've got aftermarket it's not as critical as u can tune for it, but still i'd run 40. I read an article about 2t-g injectors and all the flow rates were meausured at 40psi as well -- so again pointing towards 40psi. Hope this helps.