Author | Topic |
Location: Melbourne
Registered: August 2005
|
AE93 4agze conversion (gearbox)
|
Fri, 25 November 2005 21:37
|
|
Hi Guys,
Can anyone explain what is neccessary to bolt up a 4agze LSD gearbox with its massive drive shafts to a standard sx rolla 4age block. Thank you.
|
|
|
Location: Brisbane
Registered: May 2002
|
Re: AE93 4agze conversion (gearbox)
|
Sat, 26 November 2005 09:46
|
|
clutch, flywheel, AE92 GZE rear engine mount, GZE shafts, E series mechanical speedo sender.
|
|
|
Location: Newcastle
Registered: August 2002
|
Re: AE93 4agze conversion (gearbox)
|
Sat, 26 November 2005 10:29
|
|
Im planning on doin this also but one thing i found that could go wrong and will probably find out later when i actually try to do it is that the longer shaft has a bracket that bolts up to the back of the engine block to hold it in place no to sure how im gonna fix this problem but find out later. Also people have mentioned that the ratios and gear set is not appropriate for na cars and will most likely loose power rather than gain i say have a go cos they said the exact same thing for my friends car when he put an ep82 starlet gearbox in a corolla 2 gp turbo and it worked sweet as.
|
|
|
Location: Melbourne
Registered: August 2005
|
Re: AE93 4agze conversion (gearbox)
|
Sat, 26 November 2005 20:23
|
|
Thanks guys, I'll have a crack at it and report back with the results.
Cheers!
|
|
|
Registered: November 2005
|
Re: AE93 4agze conversion (gearbox)
|
Sun, 27 November 2005 10:37
|
|
you could use the AE95 ratios or RAV4 ratios if you like,RAV4 has uprated syncros if your keen enough they should fit
|
|
|