Toymods Car Club
www.toymods.org.au
F.A.Q. F.A.Q.    Register Register    Login Login    Home Home
Members Members    Search Search
Toymods » General Car Talk » Soarer owners dedicated thread

Show: Today's Posts  :: Show Polls 
Email to friend 
Switch to threaded view of this topic Create a new topic Submit Reply
AuthorTopic
justcallmefrank
Forums Junkie


I supported Toymods

Location:
Perth
Registered:
May 2002
 
Re: Soarer owners dedicated thread Mon, 28 November 2005 23:33 Go to previous messageGo to next message
Big Rob wrote on Mon, 28 November 2005 10:30

Now i am under the assumption that since the AFM has not maxed out it shall still be adding fuel along with the air. So what could be dodgy about that?
Point correct. It will fuel right up until it runs out of resolution, then it'll feel like you broke it, and you'll have a sore neck Wink

Big Rob wrote on Mon, 28 November 2005 10:30


Hey ndqcpr, yes is the same one as off ebay. If you have it sitting just bellow 10 psi, you are pretty much running it at stock levels. Aproxximatly 9psi is stock. I think you can go all the way up past 16psi before hitting boost cut or so but the little CT12's wont be anywhere in their efficiency range. Pump it up a little and you will love it more.

My stock level was 7psi also. I'm lucky to get to 14psi before I hit boost cut.
  Send a private message to this user    
ndgcpr
Forums Junkie


Location:
Pine Rivers QLD
Registered:
April 2005
Re: Soarer owners dedicated thread Mon, 28 November 2005 23:35 Go to previous messageGo to next message
Pulsar_D00D

I would say search the thread but it would take a year lol, shoulda just bought a manual Razz

Hey matt i know a few people who are waiting on head gaskets, he imported it from the states or something and it has been a good couple of months. Those wheels look funny, it would have been cool to drive it around though, like a little monster truck. Those wheels would kill your hubs too wouldn't they?
  Send a private message to this user    
ndgcpr
Forums Junkie


Location:
Pine Rivers QLD
Registered:
April 2005
Re: Soarer owners dedicated thread Mon, 28 November 2005 23:37 Go to previous messageGo to next message
and JCMF (post when i did!!!) you blew your first ones at 12 though right, hence why i will keep mine where they are.
  Send a private message to this user    
MR 1JZ
Forums Junkie


I supported Toymods

Location:
Adelaide
Registered:
July 2004
Re: Soarer owners dedicated thread Mon, 28 November 2005 23:40 Go to previous messageGo to next message
ndgcpr wrote on Tue, 29 November 2005 10:05

Pulsar_D00D

I would say search the thread but it would take a year lol, shoulda just bought a manual Razz

Hey matt i know a few people who are waiting on head gaskets, he imported it from the states or something and it has been a good couple of months. Those wheels look funny, it would have been cool to drive it around though, like a little monster truck. Those wheels would kill your hubs too wouldn't they?


yer they arent too kind on the hubs, but I only did a total of about 50km's on them with no harsh cornering, so I doubt they did any damage...plus we checked too see if they were greased up good before we put the wheels on...luckily enough they were Smile
  Send a private message to this user    
Merudo
Forums Junkie


Location:
Central Coast, NSW
Registered:
February 2005
 
Re: Soarer owners dedicated thread Mon, 28 November 2005 23:46 Go to previous messageGo to next message
TT_50AR wrote on Tue, 29 November 2005 10:32

OH MERUDO!! pulsar dood has ur old car!! hehe



he does?

wicked Very Happy



i've got the manual crossmember, bellhousing and slave cylinder for a manual conversion still if you want to buy the stuff off me. When I had the car I had been collecting stuff and was going to do a manual conversion

but then conveniently (not convenient for my wallet) decided I wanted to save and do a full 1J conv. instead!

but then I had to sell the car. Sad

if you want the stuff off me, you can get it off me


cheers
  Send a private message to this user    
TT_50AR
Regular


Location:
sydney, turramurra
Registered:
April 2005
Re: Soarer owners dedicated thread Tue, 29 November 2005 00:26 Go to previous messageGo to next message
hey does any1 have fuel lines or 7m engine mount bolts?
  Send a private message to this user    
TT_50AR
Regular


Location:
sydney, turramurra
Registered:
April 2005
Re: Soarer owners dedicated thread Tue, 29 November 2005 00:59 Go to previous messageGo to next message
teh WALd kit from a dif angle
http://img217.auctions.yahoo.co.jp/users/2/4/5/4/bazreia-img600x450-1133191842sixyuxtupinnbutu_003.jpg
and i like the bling on the boot hehe
http://img217.auctions.yahoo.co.jp/users/2/4/5/4/bazreia-img600x450-1133191855sixyuxtupinnbutu_001.jpg
and it has a digital aircon
http://img217.auctions.yahoo.co.jp/users/2/4/5/4/bazreia-img600x450-1133191877sixyuxtupinnbutu_016.jpg

[Updated on: Tue, 29 November 2005 01:07]

  Send a private message to this user    
coFF33
Forums Junkie


Location:
Perth Western Australia
Registered:
April 2004
Re: Soarer owners dedicated thread Tue, 29 November 2005 02:48 Go to previous messageGo to next message
the MZ21 that WaxE (ian) sold recently had that digital aircon controls aswell

so im guess in those pics its a 1986 (because of the rear lights) Mz21 ? or did they not have MZ21's then .....

gah i dunno but that WALD kit looks swwwwwwwwwwweeettt
  Send a private message to this user    
TT_50AR
Regular


Location:
sydney, turramurra
Registered:
April 2005
Re: Soarer owners dedicated thread Tue, 29 November 2005 02:50 Go to previous messageGo to next message
coFF33 wrote on Tue, 29 November 2005 13:48

the MZ21 that WaxE (ian) sold recently had that digital aircon controls aswell

so im guess in those pics its a 1986 (because of the rear lights) Mz21 ? or did they not have MZ21's then .....

gah i dunno but that WALD kit looks swwwwwwwwwwweeettt

yeh the kit looks good hey but they stopped production of em:(
  Send a private message to this user    
coFF33
Forums Junkie


Location:
Perth Western Australia
Registered:
April 2004
Re: Soarer owners dedicated thread Tue, 29 November 2005 02:59 Go to previous messageGo to next message
TT_50AR wrote on Tue, 29 November 2005 10:50

coFF33 wrote on Tue, 29 November 2005 13:48

the MZ21 that WaxE (ian) sold recently had that digital aircon controls aswell

so im guess in those pics its a 1986 (because of the rear lights) Mz21 ? or did they not have MZ21's then .....

gah i dunno but that WALD kit looks swwwwwwwwwwweeettt

yeh the kit looks good hey but they stopped production of em:(


THOSE MONSTERS !!!!!!!!!!!!!!!1 Crying or Very Sad Crying or Very Sad Crying or Very Sad Crying or Very Sad
  Send a private message to this user    
Pulsar_D00D
Regular


Location:
Sydney, Northen Beaches
Registered:
July 2004
"H8GRIP"
Re: Soarer owners dedicated thread Tue, 29 November 2005 03:34 Go to previous messageGo to next message
Where do you get those sweet-ass looking Side Skirts and Front Bar from? I've seen them before, mines just got some boggo standard shiat. Looks heaps shithouse.
  Send a private message to this user    
coFF33
Forums Junkie


Location:
Perth Western Australia
Registered:
April 2004
Re: Soarer owners dedicated thread Tue, 29 November 2005 03:35 Go to previous messageGo to next message
post some pics of ya ride Pulsar D00D ...

even better , goto the members rides section and make a "Pulsar D00D's Z20 Soarer" thread with pics and info on it Razz
  Send a private message to this user    
Pulsar_D00D
Regular


Location:
Sydney, Northen Beaches
Registered:
July 2004
"H8GRIP"
Re: Soarer owners dedicated thread Tue, 29 November 2005 03:45 Go to previous messageGo to next message
coFF33 wrote on Tue, 29 November 2005 14:35

post some pics of ya ride Pulsar D00D ...

even better , goto the members rides section and make a "Pulsar D00D's Z20 Soarer" thread with pics and info on it Razz


I'll do it when i take some pics and i get home. At work atm...

edit** I want your side skirts, rear pods and front skirt/bar off your car Coffee.. They look phat. Where do i get some.

[Updated on: Tue, 29 November 2005 03:47]

  Send a private message to this user    
coFF33
Forums Junkie


Location:
Perth Western Australia
Registered:
April 2004
Re: Soarer owners dedicated thread Tue, 29 November 2005 03:55 Go to previous messageGo to next message
haha , everyone wants to wear skirts !

well this thread has been going for about 2 years , and still no one has successfully been able to get hold of some and get some copys made ....

There is a group buy of the Diana kit happening soon .. as far as i know ...

if not the Diana , it will be the other one Bazil has so hopefully u can score on that
  Send a private message to this user    
Corona RT142
Forums Junkie


Location:
Campbelltown
Registered:
November 2003
Re: Soarer owners dedicated thread Tue, 29 November 2005 04:07 Go to previous messageGo to next message
coFF33 wrote on Tue, 29 November 2005 14:55

haha , everyone wants to wear skirts !

well this thread has been going for about 2 years , and still no one has successfully been able to get hold of some and get some copys made ....

There is a group buy of the Diana kit happening soon .. as far as i know ...

if not the Diana , it will be the other one Bazil has so hopefully u can score on that

try since april this year
  Send a private message to this user    
indian
Forums Junkie


Location:
south east - melbourne
Registered:
March 2004
Re: Soarer owners dedicated thread Tue, 29 November 2005 04:25 Go to previous messageGo to next message
someone photoshop this front bar for me please
and some tint on the glass as well cheers
http://img118.imageshack.us/img118/2234/411551ko.th.jpg
  Send a private message to this user    
TT_50AR
Regular


Location:
sydney, turramurra
Registered:
April 2005
Re: Soarer owners dedicated thread Tue, 29 November 2005 04:48 Go to previous messageGo to next message
indian wrote on Tue, 29 November 2005 15:25

someone photoshop this front bar for me please
and some tint on the glass as well cheers
http://img118.imageshack.us/img118/2234/411551ko.th.jpg

photoshop front bar 2 wat
  Send a private message to this user    
indian
Forums Junkie


Location:
south east - melbourne
Registered:
March 2004
Re: Soarer owners dedicated thread Tue, 29 November 2005 04:54 Go to previous messageGo to next message
IM TRYIGN TO MODIFY THE STOCK FRONT BAR SO IT LOOKS BETTER

any ideas also want the cooler to be visible its pretty stealth atm hiding behind that front bar
i wont be using any mesh ora nything like wise just cutting some bits off it

any ideas ??????
  Send a private message to this user    
MR 1JZ
Forums Junkie


I supported Toymods

Location:
Adelaide
Registered:
July 2004
Re: Soarer owners dedicated thread Tue, 29 November 2005 04:56 Go to previous messageGo to next message
indian wrote on Tue, 29 November 2005 15:24

IM TRYIGN TO MODIFY THE STOCK FRONT BAR SO IT LOOKS BETTER

any ideas also want the cooler to be visible its pretty stealth atm hiding behind that front bar
i wont be using any mesh ora nything like wise just cutting some bits off it

any ideas ??????


id be putting some metal piping on the cooler before you modify the stocker bar...id be pretty embarrased to have the PVC showing...but thats just me i guess
  Send a private message to this user    
indian
Forums Junkie


Location:
south east - melbourne
Registered:
March 2004
Re: Soarer owners dedicated thread Tue, 29 November 2005 05:01 Go to previous messageGo to next message
hey very true man thats one thing i need to change first when i have the money

but for all those who are wondering

its still holdign fine daily driven 9 psi
and guess what not even one person so far whose looked in the engine bay has picked it out to be pvc piping
hows that for dodgy work lollllll
  Send a private message to this user    
TT_50AR
Regular


Location:
sydney, turramurra
Registered:
April 2005
Re: Soarer owners dedicated thread Tue, 29 November 2005 05:17 Go to previous messageGo to next message
do u have a betta pic of ur car indian
a bigger 1 we can work on
  Send a private message to this user    
indian
Forums Junkie


Location:
south east - melbourne
Registered:
March 2004
Re: Soarer owners dedicated thread Tue, 29 November 2005 05:22 Go to previous messageGo to next message
<a href="http://img441.imageshack.us/my.php?image=411568nn. jpg" target="_blank"><img src="http://img441.imageshack.us/img441/2467/411568nn.t h.jpg" border="0" alt="Free Image Hosting at www.ImageShack.us" /></a>

thats the only other one i have of it
  Send a private message to this user    
TT_50AR
Regular


Location:
sydney, turramurra
Registered:
April 2005
Re: Soarer owners dedicated thread Tue, 29 November 2005 05:35 Go to previous messageGo to next message
indian wrote on Tue, 29 November 2005 16:22

<a href="http://img441.imageshack.us/my.php?image=411568nn. jpg" target="_blank"><img src="http://img441.imageshack.us/img441/2467/411568nn.t h.jpg" border="0" alt="Free Image Hosting at www.ImageShack.us" /></a>

thats the only other one i have of it
yeh but wen i open it in photoshop n zoom in it goes all pixelated
so its a bit annoyin 2 work on
but tomoz ill give it ago n c wat i can do
  Send a private message to this user    
stealth007008
Regular


Location:
perth
Registered:
June 2005
Re: Soarer owners dedicated thread Tue, 29 November 2005 10:54 Go to previous messageGo to next message
http://i32.imagethrust.com/i/95985/untitledn.jpg\\what more can u do
  Send a private message to this user    
mz21_shiznac
Regular


Location:
Bunbury, W.A.
Registered:
January 2005
Re: Soarer owners dedicated thread Tue, 29 November 2005 13:08 Go to previous messageGo to next message
Hmmm, never really thought of doin it that way...
  Send a private message to this user    
coFF33
Forums Junkie


Location:
Perth Western Australia
Registered:
April 2004
Re: Soarer owners dedicated thread Tue, 29 November 2005 13:39 Go to previous messageGo to next message
stealth007008 wrote on Tue, 29 November 2005 18:54

http://i32.imagethrust.com/i/95985/untitledn.jpg\\what more can u do



HAWWWTTTTTTTTTTTTTTtttttttttttttttttt!!!!!!11111
  Send a private message to this user    
mz21_shiznac
Regular


Location:
Bunbury, W.A.
Registered:
January 2005
Re: Soarer owners dedicated thread Tue, 29 November 2005 13:49 Go to previous messageGo to next message
Maybe something like this? It's only ms paint but you could have done that youself to see what it could look like...
http://img.photobucket.com/albums/v436/mmm_onejay/411551ko.jpg
  Send a private message to this user    
MR 1JZ
Forums Junkie


I supported Toymods

Location:
Adelaide
Registered:
July 2004
Re: Soarer owners dedicated thread Tue, 29 November 2005 21:58 Go to previous messageGo to next message
coFF33 wrote on Wed, 30 November 2005 00:09

stealth007008 wrote on Tue, 29 November 2005 18:54

http://i32.imagethrust.com/i/95985/untitledn.jpg\\what more can u do



HAWWWTTTTTTTTTTTTTTtttttttttttttttttt!!!!!!11111


I am definitely doing that on my new front bar Smile
  Send a private message to this user    
soarted bruva
Regular


Location:
sydney
Registered:
May 2005
Re: Soarer owners dedicated thread Tue, 29 November 2005 22:42 Go to previous messageGo to next message
stealth007008 wrote on Tue, 29 November 2005 21:54

http://i32.imagethrust.com/i/95985/untitledn.jpg\\what more can u do


Is that an extra lip on the bottom the bar as well?
  Send a private message to this user    
TT_50AR
Regular


Location:
sydney, turramurra
Registered:
April 2005
Re: Soarer owners dedicated thread Tue, 29 November 2005 22:49 Go to previous messageGo to next message
soarted bruva wrote on Wed, 30 November 2005 09:42


Is that an extra lip on the bottom the bar as well?

yep
  Send a private message to this user    
justcallmefrank
Forums Junkie


I supported Toymods

Location:
Perth
Registered:
May 2002
 
Re: Soarer owners dedicated thread Tue, 29 November 2005 23:24 Go to previous messageGo to next message
ndgcpr wrote on Tue, 29 November 2005 07:37

and JCMF (post when i did!!!) you blew your first ones at 12 though right, hence why i will keep mine where they are.

I haven't blown any turbos Rolling Eyes They're still going, they've hit 18psi when my ECU decided a boost cut was optional, I'd have them set higher than the 13-14psi they're currently at in a heartbeat if only I could keep it from boost cutting.
  Send a private message to this user    
Chris Davey
Forums Junkie


Location:
sunny coast, qld
Registered:
October 2002
Re: Soarer owners dedicated thread Tue, 29 November 2005 23:26 Go to previous messageGo to next message
soarted bruva: Is that your car in the avatar? It looks the same as Rossco&#8217;s and AFAIK he had a TD07 as well?

Your car is the first car I have heard of with a built 1jz. Some people have cams and head work but I have never heard of anyone upgrading the rods, pistons etc. as most will go to a 2jz block at that stage. I am very interested to see how much power your car makes. I know you may have mentioned it but could you make a full list of mods? Thanks

Chris
  Send a private message to this user    
TT_50AR
Regular


Location:
sydney, turramurra
Registered:
April 2005
Re: Soarer owners dedicated thread Tue, 29 November 2005 23:33 Go to previous messageGo to next message
justcallmefrank wrote on Wed, 30 November 2005 10:24

ndgcpr wrote on Tue, 29 November 2005 07:37

and JCMF (post when i did!!!) you blew your first ones at 12 though right, hence why i will keep mine where they are.

I haven't blown any turbos Rolling Eyes They're still going, they've hit 18psi when my ECU decided a boost cut was optional, I'd have them set higher than the 13-14psi they're currently at in a heartbeat if only I could keep it from boost cutting.

does it always boost cut.. or have u actually tried it wit the car fully warm and doin it..cause mine only cuts when its really cold
  Send a private message to this user    
justcallmefrank
Forums Junkie


I supported Toymods

Location:
Perth
Registered:
May 2002
 
Re: Soarer owners dedicated thread Tue, 29 November 2005 23:41 Go to previous messageGo to next message
TT_50AR wrote on Wed, 30 November 2005 07:33

does it always boost cut.. or have u actually tried it wit the car fully warm and doin it..cause mine only cuts when its really cold
With the setting I have it on now, it doesn't often boost cut. Just occasionally when I nail it in 2nd, it usually happens below 1 bar, so I think it's the stupid flap-type AFM playing funny buggers.

Oh, and I ONLY nail it when it's fully warm Wink
  Send a private message to this user    
TT_50AR
Regular


Location:
sydney, turramurra
Registered:
April 2005
Re: Soarer owners dedicated thread Tue, 29 November 2005 23:48 Go to previous messageGo to next message
justcallmefrank wrote on Wed, 30 November 2005 10:41

TT_50AR wrote on Wed, 30 November 2005 07:33

does it always boost cut.. or have u actually tried it wit the car fully warm and doin it..cause mine only cuts when its really cold
With the setting I have it on now, it doesn't often boost cut. Just occasionally when I nail it in 2nd, it usually happens below 1 bar, so I think it's the stupid flap-type AFM playing funny buggers.

Oh, and I ONLY nail it when it's fully warm Wink

yeh cause in mine ive got it on 20 psi and have gone 2 23 but that was 2 much 4 the cut
20 in my 1g sits quite nice n doesn fuel cut
maybe tey sum octane booster n c if that actually helps a tiny bit..not sure if it will
is urs auto 1g or wat
  Send a private message to this user    
justcallmefrank
Forums Junkie


I supported Toymods

Location:
Perth
Registered:
May 2002
 
Re: Soarer owners dedicated thread Tue, 29 November 2005 23:59 Go to previous messageGo to next message
20psi and no boost cut, WTF!? It would appear someone has played with the spring in your AFM, there is no way it should be able to let that amount of boost.

My 1G is manual, but that shouldn't matter. Octane booster isn't going to assist at all, the boost cut is simply a matter of the amount of airflow coming into the engine. When it gets to a pre-determined point, it cuts.
  Send a private message to this user    
TT_50AR
Regular


Location:
sydney, turramurra
Registered:
April 2005
Re: Soarer owners dedicated thread Wed, 30 November 2005 00:06 Go to previous messageGo to next message
justcallmefrank wrote on Wed, 30 November 2005 10:59

20psi and no boost cut, WTF!? It would appear someone has played with the spring in your AFM, there is no way it should be able to let that amount of boost.

My 1G is manual, but that shouldn't matter. Octane booster isn't going to assist at all, the boost cut is simply a matter of the amount of airflow coming into the engine. When it gets to a pre-determined point, it cuts.

try taking ur airfilter off so its just pure air flowin..i dont kno..i kno that if u put a high psi on like these small turbos then its a sudden boost and then the turbo wears a bit and then slowly doesnt give u as much boost later and later on..if u get wat i mean
like over time .i dont kno..
plus my boost controller is sum cheapy 30bux 1
  Send a private message to this user    
V8soarerman
Newcomer


Banned user

Location:
sydney
Registered:
November 2005
Re: Soarer owners dedicated thread Wed, 30 November 2005 00:32 Go to previous messageGo to next message
No Message Body

[Updated on: Wed, 30 November 2005 00:50] by Moderator

  Send a private message to this user    
MR 1JZ
Forums Junkie


I supported Toymods

Location:
Adelaide
Registered:
July 2004
Re: Soarer owners dedicated thread Wed, 30 November 2005 00:39 Go to previous messageGo to next message
errr i think ill speak for everyone when I say....wtf? Confused
  Send a private message to this user    
Corona RT142
Forums Junkie


Location:
Campbelltown
Registered:
November 2003
Re: Soarer owners dedicated thread Wed, 30 November 2005 00:41 Go to previous messageGo to next message
fuck not again, this is the third time he's posted it two separate threads now this one. One has been deleted thus far. Man some ppl have too much time on their hands.
  Send a private message to this user    
Chris Davey
Forums Junkie


Location:
sunny coast, qld
Registered:
October 2002
Re: Soarer owners dedicated thread Wed, 30 November 2005 01:00 Go to previous messageGo to next message
That was quick! I was going to come here and post "banned" but he was already gooooooooooooooooooooooone. Laughing
  Send a private message to this user    
Merudo
Forums Junkie


Location:
Central Coast, NSW
Registered:
February 2005
 
Re: Soarer owners dedicated thread Wed, 30 November 2005 02:00 Go to previous messageGo to next message
stealth007008 wrote on Tue, 29 November 2005 21:54

http://i32.imagethrust.com/i/95985/untitledn.jpg\\what more can u do




PHAT.
  Send a private message to this user    
TT_50AR
Regular


Location:
sydney, turramurra
Registered:
April 2005
Re: Soarer owners dedicated thread Wed, 30 November 2005 04:21 Go to previous messageGo to next message
justcallmefrank wrote on Wed, 30 November 2005 10:59

20psi and no boost cut, WTF!? It would appear someone has played with the spring in your AFM, there is no way it should be able to let that amount of boost.

My 1G is manual, but that shouldn't matter. Octane booster isn't going to assist at all, the boost cut is simply a matter of the amount of airflow coming into the engine. When it gets to a pre-determined point, it cuts.

hey mate maybe run it down the 1/4 n c wat it runs if it doesnt fuel cut 2 much
i ran a 14.7 but i kno i could have gotten a bit faster but yeh thats a stock 1g auto
before when it was on stock boost i ran a 16.2 best which sux 4 a tt but yeh wacked 1.5 secs off my time wit just boost
  Send a private message to this user    
Big Rob
Regular


Registered:
March 2005
Re: Soarer owners dedicated thread Wed, 30 November 2005 04:39 Go to previous messageGo to next message
MMMMMMMMMMMMMMMM Evil or Very Mad MMMMMMMMMMMMMMMM

I so want one of those lips now! Add that to the list of unobtainable items: side skirts, rear pods, lip.

Ahh now i am also thinking of getting my car painted two tone. That looks sooooooo cool. I doubt though that it would be road legal, looks like the front bumper support would have to be cut through or something. But then again, it doesnt look like its for road use as it has a full cage and bonnet pins. Except for the fact it has a licence plate. Ahh thats an awosme soarer.
  Send a private message to this user    
MR 1JZ
Forums Junkie


I supported Toymods

Location:
Adelaide
Registered:
July 2004
Re: Soarer owners dedicated thread Wed, 30 November 2005 04:45 Go to previous messageGo to next message
in japan that car would be perfectly acceptable for road use Wink
  Send a private message to this user    
justcallmefrank
Forums Junkie


I supported Toymods

Location:
Perth
Registered:
May 2002
 
Re: Soarer owners dedicated thread Wed, 30 November 2005 05:29 Go to previous messageGo to next message
TT_50AR wrote on Wed, 30 November 2005 12:21


hey mate maybe run it down the 1/4 n c wat it runs if it doesnt fuel cut 2 much
i ran a 14.7 but i kno i could have gotten a bit faster but yeh thats a stock 1g auto
before when it was on stock boost i ran a 16.2 best which sux 4 a tt but yeh wacked 1.5 secs off my time wit just boost

It's run on the quarter with two 15.3's because I can't launch. It had enough mph for an easy low 14, and thats still with no power above 5000rpm.
  Send a private message to this user    
TT_50AR
Regular


Location:
sydney, turramurra
Registered:
April 2005
Re: Soarer owners dedicated thread Wed, 30 November 2005 05:34 Go to previous messageGo to next message
justcallmefrank wrote on Wed, 30 November 2005 16:29

TT_50AR wrote on Wed, 30 November 2005 12:21


hey mate maybe run it down the 1/4 n c wat it runs if it doesnt fuel cut 2 much
i ran a 14.7 but i kno i could have gotten a bit faster but yeh thats a stock 1g auto
before when it was on stock boost i ran a 16.2 best which sux 4 a tt but yeh wacked 1.5 secs off my time wit just boost

It's run on the quarter with two 15.3's because I can't launch. It had enough mph for an easy low 14, and thats still with no power above 5000rpm.


i ran 14.7 at 100mph my bro has a jzz30 1j and he ran 14.1 at 99mph
lol so i was faster than him down the hole str8 lol but therefore he got d better start
  Send a private message to this user    
soarted bruva
Regular


Location:
sydney
Registered:
May 2005
Re: Soarer owners dedicated thread Wed, 30 November 2005 05:46 Go to previous messageGo to next message
Chris Davey wrote on Wed, 30 November 2005 10:26

soarted bruva: Is that your car in the avatar? It looks the same as Rossco&#8217;s and AFAIK he had a TD07 as well?

Your car is the first car I have heard of with a built 1jz. Some people have cams and head work but I have never heard of anyone upgrading the rods, pistons etc. as most will go to a 2jz block at that stage. I am very interested to see how much power your car makes. I know you may have mentioned it but could you make a full list of mods? Thanks

Chris



Yeah Chris, thats my soarer in the avatar. Think Rossco's is black and silver two tone where i've got gold down the bottom half. TD07 has now been replaced as of hours ago with a GT35/40 BB turbo (TD07 now for sale, anyone?) I'll have some figues 2morrow once we tune and do a dyno run. The car was previously used for drags in japan and was meant to have been putting out 700hp as well as having a fair bit done to the motor. Mods that i'm aware of are
TD07 turbo (now replaced)
Custom manifold
HKS external wastegate
was running hks F con V pro plug in (replaced with microtech,
Huge FMIC
Large injectors,
aftermarket fuel rail
cam and adjustble cam gears,
forgies,
strengthed valve springs,
GTR fuel pump,
3.5 cat with high flow cat
Adjustable coilovers all round

Think thats it. We got 270rwkw @16psi last week but 2morrow's dyno sheet should be a lot more impressive if we finally have no hurdles in turning up the boost this time
  Send a private message to this user    
TT_50AR
Regular


Location:
sydney, turramurra
Registered:
April 2005
Re: Soarer owners dedicated thread Wed, 30 November 2005 06:08 Go to previous messageGo to next message
vent!!
http://img185.auctions.yahoo.co.jp/users/0/4/5/6/cartecsendai-img600x450-1133167780_153.jpg
  Send a private message to this user    
Big Rob
Regular


Registered:
March 2005
Re: Soarer owners dedicated thread Wed, 30 November 2005 06:55 Go to previous messageGo to next message
Hey guys, well my car was runnign awsome till i filled up today. Last time i filled up a week ago it was with optimax and brought the car back to being responsive and felt much more alive. I was so pleased but then today i put regular unleadd in it and it is now sad and mopy. Can knock sensor die and go crazy, pulling tonnes of timing as the car never used to be like this?

Any ideas
  Send a private message to this user    
Rossco
Regular


Location:
Perth
Registered:
June 2002
 
Re: Soarer owners dedicated thread Wed, 30 November 2005 06:57 Go to previous messageGo to next message
finally got boost to hold
made 403 rwhp today

thing is an animal

http://obsidian.technolan.com.au/gallery/Cars/Pict ure_103
  Send a private message to this user    
MR 1JZ
Forums Junkie


I supported Toymods

Location:
Adelaide
Registered:
July 2004
Re: Soarer owners dedicated thread Wed, 30 November 2005 06:57 Go to previous messageGo to next message
TT_50AR wrote on Wed, 30 November 2005 16:38

vent!!
http://img185.auctions.yahoo.co.jp/users/0/4/5/6/cartecsendai-img600x450-1133167780_153.jpg



Topstage!
  Send a private message to this user    
MR 1JZ
Forums Junkie


I supported Toymods

Location:
Adelaide
Registered:
July 2004
Re: Soarer owners dedicated thread Wed, 30 November 2005 06:59 Go to previous messageGo to next message
Rossco wrote on Wed, 30 November 2005 17:27

finally got boost to hold
made 403 rwhp today

thing is an animal

http://obsidian.technolan.com.au/gallery/Cars/Pict ure_103


fuckyeah...now time for some skids pics/vids isnt it Wink
  Send a private message to this user    
justcallmefrank
Forums Junkie


I supported Toymods

Location:
Perth
Registered:
May 2002
 
Re: Soarer owners dedicated thread Wed, 30 November 2005 07:01 Go to previous messageGo to next message
Big Rob wrote on Wed, 30 November 2005 14:55

Any ideas

Yeah, don't ever put regular unleaded in it. At a bare minimum feed it a diet of premium, preferrably 98RON. I can imagine it would be pulling shitloads of timing out of it to suit the crappy fuel!
  Send a private message to this user    
coFF33
Forums Junkie


Location:
Perth Western Australia
Registered:
April 2004
Re: Soarer owners dedicated thread Wed, 30 November 2005 08:09 Go to previous messageGo to next message
i feed it nothing but Premium (Silver one)or Ultimate

if i have NO money , and im talking , not enuf for food ill feed it shell premium ...

even my old RA65 22re wasnt happy on unleaded AND THATS AN 84' !!!!
  Send a private message to this user    
BlackSupra
Forums Junkie


Registered:
August 2002
Re: Soarer owners dedicated thread Wed, 30 November 2005 10:28 Go to previous messageGo to next message
Rosco has some very nice skid pics. Cool
  Send a private message to this user    
stealth007008
Regular


Location:
perth
Registered:
June 2005
Re: Soarer owners dedicated thread Wed, 30 November 2005 11:22 Go to previous messageGo to next message
yes but they should look a hell of a lot better now
  Send a private message to this user    
ndgcpr
Forums Junkie


Location:
Pine Rivers QLD
Registered:
April 2005
Re: Soarer owners dedicated thread Thu, 01 December 2005 05:27 Go to previous messageGo to next message
I always fill mine with ultimate now, i used to use optimax once but i don't anymore, i like ultimate better.

And there is no stories of anyone blowing there turbo's below 14PSI? hmm, i think i am gonna be "fully sik" and bump it up to 8.5PSI/12PSI.

Now TT_50AR are you reading 20PSI at the gauge, because as i have posted in the tech section it seems that my gauge is out, That boost reading i have posted is Dyno guys/my boost gauge. so its running 12PSI on my boost gauge but the dyno guys reckon the dyno read 8.5. i reckon its going harder and that my PSSHH (even if its back pressure through the AFM sound so much better now Smile.
  Send a private message to this user    
TT_50AR
Regular


Location:
sydney, turramurra
Registered:
April 2005
Re: Soarer owners dedicated thread Thu, 01 December 2005 05:48 Go to previous messageGo to next message
ndgcpr wrote on Thu, 01 December 2005 16:27

I always fill mine with ultimate now, i used to use optimax once but i don't anymore, i like ultimate better.

And there is no stories of anyone blowing there turbo's below 14PSI? hmm, i think i am gonna be "fully sik" and bump it up to 8.5PSI/12PSI.

Now TT_50AR are you reading 20PSI at the gauge, because as i have posted in the tech section it seems that my gauge is out, That boost reading i have posted is Dyno guys/my boost gauge. so its running 12PSI on my boost gauge but the dyno guys reckon the dyno read 8.5. i reckon its going harder and that my PSSHH (even if its back pressure through the AFM sound so much better now Smile.

well that could b tru mate but if i turn the controller right down it reads 9psi which is wat stock psi it normally runs
but on20 its a hell of a bigger jolt at 1st when its on full boost
  Send a private message to this user    
justcallmefrank
Forums Junkie


I supported Toymods

Location:
Perth
Registered:
May 2002
 
Re: Soarer owners dedicated thread Thu, 01 December 2005 06:47 Go to previous messageGo to previous message
ndgcpr wrote on Thu, 01 December 2005 13:27

And there is no stories of anyone blowing there turbo's below 14PSI?

Not on 1G's, they have steel wheels.
  Send a private message to this user    
Pages (51): [ «  <  36  37  38  39  40  41  42  43  44  45  46  47  48  49  50  51  >  »]   Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic:Squeaky hatch...
Next Topic:post your best drift pics!!!
Goto Forum:
-=] Back to Top [=-

Current Time: Thu Mar 28 16:12:31 UTC 2024

Total time taken to generate the page: 0.01230001449585 seconds

Bandwidth utilization bar

.:: Contact :: Home ::.

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.