Author | Topic |
Location: Brisbane
Registered: October 2004
|
|
|
Location: Brisbane
Registered: April 2003
|
Re: G series LSD
|
Wed, 30 November 2005 05:47
|
|
Dude, you should be able to grab a "G" series from any 4WD wreckers Grab one from a late model Hilux.
|
|
|
Location: Brisbane
Registered: October 2004
|
Re: G series LSD
|
Wed, 30 November 2005 08:04
|
|
ahhhhh... so the G series lsd came from the later model hilux... easy, hadn't thought about them
any idea if it'll fit in the RN20 diff??? i imagine it would, same size (drum 2 drum as the RN25), just hoping for a more definite answer...
cheers
|
|
|
Location: Brisbane
Registered: April 2003
|
|
|
Location: Carlingford, Sydney
Registered: May 2002
|
Re: RN20 diff => G series LSD
|
Wed, 30 November 2005 13:50
|
|
you may find the axels bind in the lsd
but nothing 2mm of each wont fix
|
|
|
Location: Brisbane
Registered: October 2004
|
Re: RN20 diff => G series LSD
|
Wed, 30 November 2005 14:02
|
|
EMP-2TG wrote on Wed, 30 November 2005 23:50 | you may find the axels bind in the lsd
but nothing 2mm of each wont fix
|
whatcha mean? 2mm of each
|
|
|
Location: Montrose, VIC
Registered: May 2002
|
Re: RN20 diff => G series LSD
|
Wed, 30 November 2005 21:30
|
|
I think he means 2mm OFF
|
|
|
Location: Brisbane
Registered: May 2002
|
Re: RN20 diff => G series LSD
|
Wed, 30 November 2005 23:33
|
|
Note the xA70 Supra and xZ20 Soarer came with optional G series LSD's, so that's another potential source. And of course there's a wide range of aftermarket centres available, including the TrueTrac torsen centre which quite a few people here are using.
|
|
|
Location: Adelaide
Registered: September 2003
|
Re: RN20 diff => G series LSD
|
Thu, 01 December 2005 03:04
|
|
can you use a non lsd centre pumpkin and put the lsd unit in it, I just remember reading somewhere on some internet page that there are slight differences in the Centre housings.
|
|
|
Location: Brisbane
Registered: October 2004
|
Re: RN20 diff => G series LSD
|
Thu, 01 December 2005 07:55
|
|
mrshin wrote on Thu, 01 December 2005 07:30 | I think he means 2mm OFF
|
of course, was late when i posted that comment...
i can only assume he meant 2mm off the lenght??
thanks all for the advice, just what i wanted
|
|
|
Location: Carlingford, Sydney
Registered: May 2002
|
Re: RN20 diff => G series LSD
|
Thu, 01 December 2005 12:50
|
|
yeah 2mm off each axel sorry
well that was with my rn27 diff with an 89 4x4 LSD center
just started to bind up when done up tight... so maybe 1-2mm to long total
|
|
|
Registered: June 2002
|
Re: RN20 diff => G series LSD
|
Thu, 01 December 2005 20:37
|
|
Just while we are on G-series Diff's...
Can the ring/pinion from a live axle G-series fit into a IRS housing.
I presume so but I thought I'd check.
And does anyone have a 3.73:1 G-series ring/pinion for sale???
Preferably a 3.73:1 open or LS diff from a MA70.
Can supply 4.11:1 as trade if needed.
|
|
|