| Author | Topic |
|---|
Location:
Auckland, New Zealand
Registered:
July 2005
|
|
1G-GTE ARM wiring
|
Mon, 05 December 2005 21:59
|
 |
Hey all,
I've had a search through the threads and have been unable to find what I need.
I need to know, what wire does what on the 1G-GTE AFM.
Thanks
Hunt
www.supras.co.nz *home to the not so standard 1G-GTE*
|
|
|
Location:
Auckland, New Zealand
Registered:
July 2005
|
|
Re: 1G-GTE ARM wiring
|
Mon, 05 December 2005 22:01
|
|
|
Subject should read 1G-GTE AFM wiring! Sorry.
|
|
|
I supported Toymods
Location:
Perth
Registered:
May 2002
|
|
Re: 1G-GTE ARM wiring
|
Mon, 05 December 2005 22:46
|
|
|
What in particular do you want to know?
|
|
|
I supported Toymods
Location:
Australia
Registered:
November 2003
|
|
Re: 1G-GTE ARM wiring
|
Mon, 05 December 2005 23:02
|
|
Check the Wiring Diagrams in the Repository.
Its a very similar AFM to the 7MGE.
|
|
|
Location:
Auckland, New Zealand
Registered:
July 2005
|
|
Re: 1G-GTE ARM wiring
|
Mon, 05 December 2005 23:22
|
|
I've got the 7MGE wiring but my main concern is in regards to hooking up the HKS Super AFR.
It as 4 settings:
Hotwire 0-5volt
Hotwire 5-0volt
MAP sensor
Karmen Vortex
My AFM is a flapper door style (as you say, very similar to the 7MGE one how-ever I don't know how to find out if the 1G-GTE uses 0-5 or 5-0 volt operation. The voltage versus flow rate curve of the hot wire sensors is not linear, and I believe the safr has some approximate information built into its chip to compensate for it.
Cheers
Hunt
|
|
|
I supported Toymods
Location:
Perth
Registered:
May 2002
|
|
Re: 1G-GTE ARM wiring
|
Tue, 06 December 2005 00:26
|
|
|
The 1GGTE AFM is very similar to the 7MGE as described. It goes from 5-0V range (well, more like ~4.5-0.5V but you get the idea).
|
|
|
