Author | Topic |
Location: Fl
Registered: February 2003
|
injector upgrade
|
Fri, 14 March 2003 12:27
|
|
I am looking to upgrade the injectors in my 2tgeu and need help recognizing which will work. ie is there a way to tell what the flow rate is by looking at the injector? or do you just have to figure out which car has which injectors? I am looking for low impedance with a flow rate of 210cc's any help is appreciated. Thanks
|
|
|
Location: Fl
Registered: February 2003
|
Re: injector upgrade
|
Sat, 15 March 2003 00:54
|
|
Is timing important? Bump!
|
|
|
Banned by his request
Location: moved to tamworth
Registered: July 2002
|
Re: injector upgrade
|
Sat, 15 March 2003 05:40
|
|
the only way to tell flow rate is have them flowed! we get brand new injectors that flow diffrent rates from time to time when we test them so second hand ones can have flow rates all over the shop. 210cc is pretty common found on alot of cars. its bigger than 300cc thats harder to find. on our boosted race engines we use 1200cc and on a nat asp 6 litre we use 850cc. just get new 210cc ones. ring me on tue there about $130 each from memory could be even cheaper.
mick
|
|
|
Location: Gold Coast
Registered: May 2002
|
Re: injector upgrade
|
Sat, 15 March 2003 06:03
|
|
Have 4 3SGE one's if you're interested. top feed, 13.8 ohm, 240CC toyota part 09842-30040. $100 the set. Perf cond.
|
|
|
Location: Hornsby, N.S.W
Registered: September 2002
|
Re: injector upgrade
|
Sat, 15 March 2003 06:23
|
|
heya greg,
justin here, im using 3sge injectors in my 2tgeu supercharged, but thats running with a microtech computer.
justin
|
|
|