Author | Topic |
Registered: May 2002
|
1G-GTE driveline components
|
Sun, 16 June 2002 11:27
|
|
I need a flywheel, clutch, pressureplate and bellhousing from a 1GGTE. I also could do with a W57 or W58 cause mine is stuffed (and it's on a 18r-c so wrong bellhousing).
I could do with just the flywheel and bellhousing because I should be able to get the clutch plate and the pressure plate from any parts supplier right??
Any one that can help drop me a line
timscool@optusnet.com.au
Tim.
|
|
|
Location: Canberra
Registered: May 2002
|
Re: 1G-GTE driveline components
|
Sun, 16 June 2002 14:28
|
|
For my 1GGTE conversion i did this:
I used a 1J pressure plate, all that had to be done is to drill the locating holes out by about 2mm.
Also used an 18R flywheel, it fits straight on and it is about 2Kg LIGHTER, so bonus
As for a clutch, i got some heavy duty version of a hilux clutch. havent driven the car much yet so i cant report on the clutch as yet, but seemed fine around the block a few times!
Dont exactly know what your doing, but this should hopefully simplify things...
|
|
|
Location: Newcastle, NSW, Australia
Registered: May 2002
|
Re: 1G-GTE driveline components
|
Mon, 17 June 2002 21:50
|
|
I think I have a genuine low km 1GGTE clutch and pressure plate lying around. I'll check and get back to you.
|
|
|
Location: Newcastle, NSW, Australia
Registered: May 2002
|
1G-GTE Clutch
|
Wed, 19 June 2002 22:14
|
|
Tim,
if you're interested I do have a 1GGTE 9.5" clutch and pressure plate. Came from a low km engine. No scoring on pressure plate and clutch plate plenty of life left.
$100 + freight.
Phone 0409 572904 or email me.
Grant
|
|
|