| Author | Topic |
|---|
Location:
North Qld
Registered:
March 2003
|
 Problems with Microtech 8
|
Sat, 22 March 2003 08:32
|
 |
|
Hi guys l run a 20 valve in a offroad buggy We just changed from the old Digi pro Microtech to the Microtech MTX8 the thing runs great to 5500rpm then pops and bangs Just like the limiter cuts in. Its just like hitting a brick wall We have tryed to replace plugs, leads but no joy.... Has anybody got a ignition map and a fuel map in fact any help would be good
|
|
|
Location:
Melbourne
Registered:
August 2002
|
|
Re: Problems with Microtech 8
|
Sat, 22 March 2003 08:44
|
|
you can find maps here.
http://www.ug.cs.usyd.edu.au/~jzhou/map/fuel_map_s etting.zip
RPMwot map(remember to use these as well for normal mode)
1000 -3
1500 -4
2000 -4
2500 -3
3000 -1
3500 +0
4000 +0
4500 +1
5000 +2
5500 +3
6000 +4
6500 +5
7000 +6
8000 +7
9000 +8
|
|
|
Location:
Perth
Registered:
August 2002
|
|
Re: Problems with Microtech 8
|
Sun, 23 March 2003 05:23
|
|
do u kno if these maps could be used on my gze... if not do u kno where i could find some.
sorry to cut in on ur thread..
cheers az
|
|
|
Location:
North Qld
Registered:
March 2003
|
|
Re: Problems with Microtech 8
|
Sun, 23 March 2003 10:37
|
|
|
Sorry dont know about your GZE but mine seems to run real good with these maps.....
|
|
|
Location:
Perth
Registered:
August 2002
|
|
Re: Problems with Microtech 8
|
Sun, 23 March 2003 12:32
|
|
i should try but i dun wanna blow shit up haha
|
|
|
Location:
Melbourne
Registered:
August 2002
|
|
Re: Problems with Microtech 8
|
Sun, 23 March 2003 23:19
|
|
i don't think it will work for a gze engine.
maybe it will starts, but really not suggested you run this map on ze engines.
tsbb1-
you put that map in already?
Is it running good now?
acutally I haven't put those in yet, those are the maps I asked from another mate.
I am gonna put those in soon.
|
|
|
Location:
North Qld
Registered:
March 2003
|
 Re: Problems with Microtech 8
|
Mon, 24 March 2003 08:07
|
|
|
Yes Pepsicola l put them in last night They seen to be good Do you know if they are standard or What ???Idont know much about these motors Do you know what you can do to make them go harder? l know that you can replace cams ect but what about a standard motor.....
|
|
|
Location:
Melbourne
Registered:
August 2002
|
|
Re: Problems with Microtech 8
|
Mon, 24 March 2003 12:21
|
|
I only have exhaust and filter socks on the thottle bodies.
do you use normal mode or matrix mode?
|
|
|
Location:
North Qld
Registered:
March 2003
|
 Re: Problems with Microtech 8
|
Tue, 25 March 2003 10:12
|
|
|
l use matrix mode Can you tell me if these maps where from Dyno work or What ???
|
|
|
Location:
Sydney
Registered:
March 2003
|
|
Re: Problems with Microtech 8
|
Tue, 25 March 2003 11:23
|
|
|
Did you buy the MTX8 new or second hand as the std map that comes in them is in normal mode.If you change the WOT it will have no effect on the tune if you have reset it to Matrix
|
|
|
Location:
North Qld
Registered:
March 2003
|
|
Re: Problems with Microtech 8
|
Wed, 26 March 2003 21:40
|
|
|
it was bought new and we run it in Maxtix mode it seems to be the way to go
|
|
|
