| Author | Topic |
|---|
Registered:
June 2002
|
|
Hydro fan question-jza70
|
Thu, 20 June 2002 04:25
|
 |
|
Hi-I've swapped a 1j into a us spec mk3 supra. I went ahead and swapped over all the hydrolic fan setup as well. I wired in the sesnor from the radiator to the fan ecu, but the fan only seems to run full blast all times. I had to use the ma70 wiring for the air conditioning compressor-it is just a simple one wire type of connector, but the connector on the 1j compressor was muitiple wires-I'm wondering if the hydro fan ecu recieves a signal from the AC to turn the fan on high, and since it's not getting this signal maybe it goes in a failsafe mode keeping the fan on high all the time. Any input is welcomed-Thanks
|
|
|
Location:
Sydney
Registered:
May 2002
|
|
Re: Hydro fan question-jza70
|
Thu, 20 June 2002 06:28
|
|
man im doing the 1j into the cressida im changing over ALL the wiring including lights, dash the whole shabang!!!! but the only dewd that i know off on the forums (sorry guys that know but i don't know of) but sixworks knows the 1J in some depth so he'd be the best person to contact his name with 1J and genius have been mentioned in a sentence to me many times  
good luck man i know what your going through!!!
|
|
|
Registered:
May 2002
|
|
Re: Hydro fan question-jza70
|
Fri, 21 June 2002 08:13
|
|
|
Ditch that hydraulic fan,it sucks power.JZA70s had it,Jzz30s didn't.
|
|
|
Location:
Sydney
Registered:
May 2002
|
|
Re: Hydro fan question-jza70
|
Fri, 21 June 2002 09:41
|
|
|
true but i was told its a very nice quiet setup that works really well
|
|
|
