| Author | Topic |
|---|
Location:
Adelaide
Registered:
May 2002
|
|
EFI versions of the 2T and 3T single cam engines
|
Tue, 18 February 2003 09:48
|
 |
hey guys, I know they exist, and are fairly rare, but I have just got one of these efi manifolds... now just wondering if I were to sell it what kinda price should I look for, and does anyone know of any specs on them ? like injector sizes and flow etc. ?
I saw it in the wreckers and thought I just gotta get that.. then I can have some fun with some 2T's and boost them for a laugh....
so let's see where we go from here...
who says supercharge.......
who says turbocharge.......
Brendon
|
|
|
Location:
Colac, Victoria
Registered:
May 2002
|
|
Re: EFI versions of the 2T and 3T single cam engines
|
Tue, 18 February 2003 10:49
|
|
well seeing you could probably adapt the EFI setup odff a 2tgeu to a 2t - youd probably work on that figure ..
for rarity i dunno how much its worth - nor do i know how far you could modify it ..
start ith the jet sizes and ECU capabilitys and start from there !
hmms - as for the setup - supercharging would pe relatively straight forward if you can track down a 4agze blower + a bracket to suit - then pipe it all up
|
|
|
I supported Toymods
Location:
I renounced punctuation
Registered:
May 2002
|
|
Re: EFI versions of the 2T and 3T single cam engines
|
Tue, 18 February 2003 10:55
|
|
|
A 3TEU was made but never made it here. If you're lucky you might find a manifold.
|
|
|
Location:
MACKAY
Registered:
May 2002
|
|
Re: EFI versions of the 2T and 3T single cam engines
|
Tue, 18 February 2003 14:17
|
|
I fitted one of these manifolds onto a 2T a few years back into a TA22 , The setup consisted of 3TE inlet , 2TGE ECU , 5ME airflow meter & fuel pump , 1GGZE supercharger and extra injector , The 3TE inlet manifold is about the toughest looking one around , The plenum sits on top r/h side of the rocker cover with large chrome runners connecting to the bottom section of the manifold .
And yes they are rare !!!
Trevor
|
|
|
I supported Toymods
Location:
melbourne.victoria.austra...
Registered:
June 2002
|
|
Re: EFI versions of the 2T and 3T single cam engines
|
Wed, 19 February 2003 05:30
|
|
turbocharge. stay tuned 
|
|
|
Location:
New Zealand
Registered:
May 2002
|
|
Re: EFI versions of the 2T and 3T single cam engines
|
Wed, 19 February 2003 07:48
|
|
They actually are a very similar manifold to the 4k-e engine styling wise. Don't think Oz ever got this engine either.
Callum
|
|
|
