| Author | Topic |
|---|
I supported Toymods
Location:
melbourne.victoria.austra...
Registered:
June 2002
|
|
Box on the 2T - inline with the camshaft
|
Wed, 19 February 2003 11:36
|
 |
All.
Not really a tech question as such, but, there is a box next to the oil filter on the 2T - its in line with the camshaft - and has a vent hose which goes from the box to the inlet manifold.
WTF is it?
you can just see it at the right of this photo, sorry but its big (the photo) : http://www.vncommodore.com/images/celica/22.jpg
|
|
|
Location:
Brisbane
Registered:
December 2002
|
|
Re: Box on the 2T - inline with the camshaft
|
Wed, 19 February 2003 12:12
|
|
A crankcase ventilator perhaps. 
|
|
|
Location:
Finland
Registered:
November 2002
|
|
Re: Box on the 2T - inline with the camshaft
|
Wed, 19 February 2003 12:29
|
|
| Quote: |
A crankcase ventilator perhaps.
|
Nope! Its some part of emission control system. Dont know exactly which one and as far as i can see i dont care.
|
|
|
I supported Toymods
Location:
melbourne.victoria.austra...
Registered:
June 2002
|
|
Re: Box on the 2T - inline with the camshaft
|
Thu, 20 February 2003 05:08
|
|
it looks like this : 
|
|
|
Location:
Colac, Victoria
Registered:
May 2002
|
|
Re: Box on the 2T - inline with the camshaft
|
Thu, 20 February 2003 08:28
|
|
where does the orange hose plug into - it could be the breather that rods been looking for - on my 2t's and 2tbs - theyve never had one of these - and on the 2tb - ive just pluugged the hole up with a second oil pressure sender thing .. Doesnt seem to effect the old girl
Id say its got something to do with crankcase breathing or emissions
|
|
|
Location:
Brisbane
Registered:
May 2002
|
|
Re: Box on the 2T - inline with the camshaft
|
Thu, 20 February 2003 09:16
|
|
Yeah crankcase ventilation?
Cheers
Wilbo
|
|
|
I supported Toymods
Location:
melbourne.victoria.austra...
Registered:
June 2002
|
|
Re: Box on the 2T - inline with the camshaft
|
Thu, 20 February 2003 09:22
|
|
stu the orange hose goes into the inlet manifold. i dunno if its a crank case breather, there is one up top, but, why the heck would there be one below as well?
|
|
|
Location:
Colac, Victoria
Registered:
May 2002
|
|
Re: Box on the 2T - inline with the camshaft
|
Thu, 20 February 2003 09:42
|
|
its all got to do with ventilation - how it helps im buggered if i know ..
you can tell the riceboys its a secondary air filter - makes a good 20 HP extra !
waste of time IMHO - take it off - and put a breather on the top one like mine - install your webery goodness - cam the bastard - and have a hella strong 2t !
|
|
|
