Author | Topic |
Location: sydney
Registered: December 2002
|
Luke's ta22 20 valve pics
|
Tue, 04 March 2003 10:41
|
|
here are some pics of my ta22 with the 20 valve and before i did the rebuild with the injected 2tg
|
|
|
Location: sydney
Registered: December 2002
|
|
|
I supported Toymods
Location: Sutho/Hills NSW
Registered: September 2002
|
|
|
Location: sydney
Registered: December 2002
|
Re: Luke's ta22 20 valve pics
|
Tue, 04 March 2003 11:00
|
|
yeah in the first pic i was going to use the standard computer
but then i got talking to a JUST ENGINE MANAGEMENT (0415111644) who help me install a haltech
so i got rid off the afm and had direct fire installed for a bit more room between the fire wall and the dizzy
i modified the standard plenum chamber to suit it came up close but a neat fit with the brake and clutch master cylinders
|
|
|
I supported Toymods
Location: Sutho/Hills NSW
Registered: September 2002
|
Re: Luke's ta22 20 valve pics
|
Tue, 04 March 2003 11:37
|
|
looks very nice, nice work.
|
|
|
Location: Hornsby, N.S.W
Registered: September 2002
|
Re: Luke's ta22 20 valve pics
|
Sat, 22 March 2003 14:33
|
|
man, it looks real nice, i think roadrunner (alex) is looking at doing a similar conversion to his 22.
justin
|
|
|
Location: Hornsby, N.S.W
Registered: September 2002
|
Re: Luke's ta22 20 valve pics
|
Sat, 22 March 2003 14:36
|
|
what gearbox are you running, is it just the t50 with a bell housing???
justin
|
|
|
Location: sydney
Registered: December 2002
|
Re: Luke's ta22 20 valve pics
|
Sun, 23 March 2003 10:37
|
|
the gear box is out of a ae71 corolla but its thrashed now so looking at upgrading to a supra box. thanx for the comments
luke
|
|
|
Location: up yours!
Registered: May 2002
|
Re: Luke's ta22 20 valve pics
|
Sat, 29 March 2003 06:23
|
|
where did you get the crank angle sensor from?
is it running coil packs like the GZE?
thanks
YOGI8U
|
|
|
Location: sydney
Registered: December 2002
|
Re: Luke's ta22 20 valve pics
|
Tue, 01 April 2003 09:02
|
|
the coil packs are off a gsr lancer, Adam from j.e.m supplied them and i think he said thats where they come from.
its the standard 20 valve sensor I'm not sure how he wired it up to work but the e6k haltech runs the setup fine i just fabricated a aluminum cover to remove the dizzy cap
|
|
|
Location: Eskilstuna, Sweden
Registered: May 2002
|
Re: Luke's ta22 20 valve pics
|
Fri, 04 April 2003 23:01
|
|
Very nice conversion, good to see you snuck your toes into the overhead shot......
|
|
|