Toymods Car Club Inc: Tech & Conversions => 20valve install RWD - the right way

Toymods Car Club
www.toymods.org.au

Toymods » Tech & Conversions » 20valve install RWD - the right way - with link to download Show: Today's Posts :: Show Polls Email to friend

Author

Topic

Youngy
Forums Junkie

Location:
Eskilstuna, Sweden
Registered:
May 2002

20valve install RWD - the right way - with link to download	Thu, 10 April 2003 00:20

Hello all, Many of you are probably wondering what I meant by the right way in the subject. Well I mean a 20valve dropped into a RWD car (in this case a KE20 Corolla) without a distributor and hench no need to either a) put the motor to far forward and stuff the cars handling b) put a hole in the firewall, which is not something the ADRs approve of. This means that the engine will run an after market computer and will be all the better for it. Also of note is how far back the motor is due to changes made to the cooling system - unlike most conversions which run pipes from the back of the head up the side of the motor (there is no room in this case). I have a pdf document which gives a brief outline with embedded pictures. For those interested leave your email address and I will send you a copy. Or if someone can host the pdf file or the pictures I have I can post the details here directly Cheers [Updated on: Thu, 10 April 2003 03:17] [Report message to a moderator]

pepsicola
Forums Junkie

Location:
Melbourne
Registered:
August 2002

Re: 20valve install RWD - the right way	Thu, 10 April 2003 00:28

im interested. jzho9523@bigpond.net.au [Report message to a moderator]

Location:
Sydney
Registered:
April 2003

Re: 20valve install RWD - the right way	Thu, 10 April 2003 00:38

count me in too. garry.myers@offroadracing.com.au Cheers! [Report message to a moderator]

rob_RA40
Forums Junkie

Location:
c'town, NSW
Registered:
May 2002

Re: 20valve install RWD - the right way	Thu, 10 April 2003 02:33

email it to nark he will upload it to the techdocs section of the toymods website [Report message to a moderator]

Youngy
Forums Junkie

Location:
Eskilstuna, Sweden
Registered:
May 2002

Re: 20valve install RWD - the right way	Thu, 10 April 2003 02:52

I have indeed sent an email to Nark. Thanks. Hi Nark, if you do see this your email quoted on the site seems to have issues: ******************************************** THIS IS A WARNING MESSAGE ONLY YOU DO NOT NEED TO RESEND YOUR MESSAGE ******************************************** The original message was received at Thu, 10 Apr 2003 12:48:51 +1000 from bay1-f62.bay1.hotmail.com [65.54.245.62] ----- The following addresses had transient non-fatal errors ----- <max@toymods.org.au> ----- Transcript of session follows ----- <max@toymods.org.au>... Deferred: Connection refused by nark.is-a-geek.com. Warning: message still undelivered after 4 hours Will keep trying until message is 5 days old Reporting-MTA: dns; sydney3.qnix.com.au Arrival-Date: Thu, 10 Apr 2003 12:48:51 +1000 Final-Recipient: RFC822; max@nark.is-a-geek.com Action: delayed Status: 4.4.1 Remote-MTA: DNS; nark.is-a-geek.com Last-Attempt-Date: Thu, 10 Apr 2003 17:35:07 +1000 Will-Retry-Until: Tue, 15 Apr 2003 12:48:51 +1000 [Updated on: Thu, 10 April 2003 12:10] [Report message to a moderator]

ae86drift
Forums Junkie

I supported Toymods

Location:
sydney.au
Registered:
August 2002

Re: 20valve install RWD - the right way	Thu, 10 April 2003 03:09

im interested garth@digitalfunk.net [Report message to a moderator]

EvilJack
Forums Junkie

I supported Toymods

Location:
Sutho/Hills NSW
Registered:
September 2002

Re: 20valve install RWD - the right way	Thu, 10 April 2003 03:11

Here we go people, just quickly put somthing together. http://sydcorollaclub.cjb.net/KE20 20V Install/ [Report message to a moderator]

Youngy
Forums Junkie

Location:
Eskilstuna, Sweden
Registered:
May 2002

Re: 20valve install RWD - the right way	Thu, 10 April 2003 03:16

Thanks, People all the pics and the PDF file can be sourced from the above address thanks to eviljacks generosity!! Cheers [Report message to a moderator]

Registered:
May 2002

Re: 20valve install RWD - the right way	Mon, 22 September 2003 11:48

Hi, The link isn't working can i get the doc please. [Report message to a moderator]

EvilJack
Forums Junkie

I supported Toymods

Location:
Sutho/Hills NSW
Registered:
September 2002

Re: 20valve install RWD - the right way - with link to download	Mon, 22 September 2003 12:12

http://sydcorollaclub.cjb.net/tech/KE20%2020V%20In stall/ sorry change of directory [Report message to a moderator]