| Author | Topic |
|---|
Location:
Melbourne
Registered:
April 2003
|
|
Which Diff for the 1jzgte??
|
Fri, 11 April 2003 05:31
|
 |
|
Need to know this please. It will be going on the '79 corona.
|
|
|
Location:
c'town, NSW
Registered:
May 2002
|
|
Re: Which Diff for the 1jzgte??
|
Fri, 11 April 2003 05:57
|
|
so your asking this question assuming everyone on the forum already knows:
- how much money u want to spend
- whether u want 4 stud or 5 stud
- whether u want LSD or single spinner
- whether u want drums or discs
- how much power you want to put thru it
- whether you want toyota or borg warner or other
- if you can do any of the conversion work yourself
and therefore be able to answer your question?
|
|
|
Location:
sunny coast, qld
Registered:
October 2002
|
|
Re: Which Diff for the 1jzgte??
|
Fri, 11 April 2003 14:13
|
|
is your corona an XT130 model?
if so, i am doing the same conversion. the previous owner had already converted the diff for mine. He thinks it was a late model pajero diff but was not certain. it is connected to standard axles then to 6 stud hubs with 4wd brakes. still uses standard suspension. hope that helps.
BTW it is an LSD.
how far you up to in the conversion?
|
|
|
I supported Toymods
Location:
Epping, Sydney
Registered:
May 2002
|
|
Re: Which Diff for the 1jzgte??
|
Sat, 12 April 2003 02:33
|
|
|
if you've got money, get 5 studs put on the hubs at the same time. it'll save you a lot of time finding wheels
|
|
|
Location:
Melbourne
Registered:
April 2003
|
|
Re: Which Diff for the 1jzgte??
|
Sat, 12 April 2003 09:55
|
|
Umm i don't know what alot of that is at all. Sorry guys.
I haven't started the conversion yet, just getting ideas of what i will need and everything, so when i do have enough $$$ i know what to get straight away :)
|
|
|
Location:
sunny coast, qld
Registered:
October 2002
|
|
Re: Which Diff for the 1jzgte??
|
Sun, 13 April 2003 11:40
|
|
draven: what 5 stud hubs would fit on to the XT130 stub axle? i have already been searching for bearings to fit my 6 stud hubs with no success and i would rather something that uses the standard bearings.
thanks
chris
|
|
|
I supported Toymods
Location:
Epping, Sydney
Registered:
May 2002
|
|
Re: Which Diff for the 1jzgte??
|
Sun, 13 April 2003 15:58
|
|
I'm not the person to ask
only 5-stud hubs I'm intertested in are the ones that fit a ma61
and I *think* that's the mx123 (cressida?) ??
regardless, if I even decide to do that it's a fair way down the track
|
|
|
