Toymods Car Club Inc: Tech & Conversions => AFM? Does it matter what position it is in??

Toymods Car Club
www.toymods.org.au

Toymods » Tech & Conversions » AFM? Does it matter what position it is in?? Show: Today's Posts :: Show Polls Email to friend

Author

Topic

Blaze
Regular

Location:
Brisbane
Registered:
December 2002

AFM? Does it matter what position it is in??	Mon, 14 April 2003 00:55

I am putting into my RA23 an 18rgeu and do not have the original filter box. I have one from an 85 Camry and one from an early 80's Cressida. to make them fit I will have to position the AFM so that is will not be totally flat. Does it matter if it is on it's side?? Let me know what you think or your experiences. thanks [Updated on: Mon, 14 April 2003 01:01] [Report message to a moderator]

haggis
Regular

Location:
Adelaide
Registered:
May 2002

Re: AFM? Does it matter what position it is in??	Mon, 14 April 2003 02:23

Depending on the type of AFM, yes iw will make a difference. If it is a flap type, it will affect it to a degree, it it's a hotwire type, no probs as fair a i know! Craig. [Report message to a moderator]

Blaze
Regular

Location:
Brisbane
Registered:
December 2002

Re: AFM? Does it matter what position it is in??	Mon, 14 April 2003 05:27

it is a flap type. so does that mean it needs to be as flat as possible?? [Report message to a moderator]

haggis
Regular

Location:
Adelaide
Registered:
May 2002

Re: AFM? Does it matter what position it is in??	Mon, 14 April 2003 05:52

as close to the way it was installed from the factory as possible. Craig. [Report message to a moderator]

Previous Topic:	Battery/Electrical Issue
Next Topic:	Boring 1G's

Current Time: Mon Jan 20 18:53:18 UTC 2025

Total time taken to generate the page: 0.006356954574585 seconds

.:: Contact :: Home ::.