| Author | Topic |
|---|
Location:
nowra
Registered:
March 2003
|
 wanted 1UZ-FE info
|
Sun, 20 April 2003 03:00
|
 |
who has a 1UZ-FE powred car and has had if dynoed or done the 1/4 mile in it
questions to owners:
what car is it in
what gearbox
what ratio diff
how heavy is your car
what size tyres
how much rwkw do they make
what sort of 1/4 mile times do you get
fuel consumption etc
what series do you have
cheers
|
|
|
Location:
nowra
Registered:
March 2003
|
|
Re: wanted 1UZ-FE info
|
Sun, 20 April 2003 09:35
|
|
just got some info from here
http://www.itplanet.net.au/Cressida/1UZ%20history. htm
During one particular test, engineers installed a 1UZ-FE into a vehicle and ran it (on a dyno) at the equivalent of 240KP/H for 87,000kms continuously!
362.5 hours straight!!!
im deffinately gonna see if i can fit one of these in the sa63
but i still want some dyno figures
|
|
|
Location:
Melbourne
Registered:
October 2002
|
|
Re: wanted 1UZ-FE info
|
Sun, 20 April 2003 10:41
|
|
I have a Soarer with that donk in it - its a '93.
I get near enough to 143rwKw in it on the dyno.
Its running that standard UZZ31 running gear.
For more info on 1UZ-FE dyno runs, see here: http://planetsoarer.com
|
|
|
Location:
nowra
Registered:
March 2003
|
|
Re: wanted 1UZ-FE info
|
Sun, 20 April 2003 11:28
|
|
i went to http://planetsoarer.com/
i thaught this engine was naturally aspirated but all the info i found was for twin turbo engines.
|
|
|
Location:
Sydney
Registered:
July 2002
|
|
Re: wanted 1UZ-FE info
|
Mon, 21 April 2003 23:45
|
|
Standard soarers get about 130kw. Fitting autronic gets another 10kw.
I'll dyno mine in July.
I'm running it in my MA70 supra, with R154 box and standard supra turbo LSD (don't know ratios). Car is 1580kgs (half a tank of fuel and all legal stuff in - jack, spare).
Last weekend on the Dubbo trip the fuel consumption was 12L/100kms there (over the mountans) and 11.7L/100kms around dubbo, and half way back (no real mountains, but still showing off regluarly). I'm running Delco computer though. Don't know fuel consumption on a stock V8 (or autronic one).
|
|
|
Location:
auckland
Registered:
May 2003
|
|
Re: wanted 1UZ-FE info
|
Thu, 08 May 2003 04:53
|
|
I am putting one in a 32 ford hot rod
I am useing 8 throttle bodys with good headers and sequential injection via an aftermarket comp it should be in the region of 400 horse it already has over 400ft of torque
No 1/4 yet as it is still a pile of parts but I have no reason to expect anything less than a 12
|
|
|
