| Author | Topic |
|---|
Location:
Adelaide
Registered:
April 2003
|
|
Torque Settings for 2T/GEU/3T Hybrid
|
Fri, 25 April 2003 02:58
|
 |
I am after the torque settings for
The con rods
The fly wheel
cheers chris 
|
|
|
Location:
Hornsby, N.S.W
Registered:
September 2002
|
|
Re: Torque Settings for 2T/GEU/3T Hybrid
|
Fri, 25 April 2003 13:31
|
|
im really tired right now, but tomorrow afternoon (saturday) i will pull out my 2tgeu manual and get the exact torque settings for your requirments.
justin 
if im lazy you can call me on 0413461518
|
|
|
Location:
Brisbane, Queensland
Registered:
May 2002
|
|
Re: Torque Settings for 2T/GEU/3T Hybrid
|
Sun, 27 April 2003 04:50
|
|
ha ha beat you to it juzzo
now your going 3T bottom end
Rods: 53 - 63 ft-lb or 7.2 - 8.8 kg/m
flywheel: FT!!!
if you want anymore settings just email me, I've only just built my hybrid 3T-G four months ago.
|
|
|
Registered:
May 2002
|
|
Re: Torque Settings for 2T/GEU/3T Hybrid
|
Sun, 27 April 2003 08:34
|
|
you lazy bastard juzzo!
connecting rod and cap for the 2T is-
400-500kg.cm (28.9-36.2ft.lb)
the flywheel-
580-660kg.cm (42-47.7ft.lbs) for the 2T
810-890kg.cm(58.6-64.4ft.lb) for the 2TG
These torques from the Toyota Carina and Celica Repair Manual. You'll probably have to put a bit more torque on them as a hybrid would go harder than a stock engine, so bigbadbenny's right, just do the flywheel up FT!
|
|
|
