| Author | Topic |
|---|
Location:
brisbane
Registered:
March 2003
|
|
18rg ignition
|
Sat, 17 May 2003 01:10
|
 |
|
i am after the moduel for the 18rg electronic ignition distributer if anybody knows of any please.
|
|
|
Location:
Blue Mountains, NSW
Registered:
May 2003
|
|
Re: 18rg ignition
|
Sat, 17 May 2003 05:36
|
|
Just go to a wreckers and get the igniter and module off an RA60 with a 21R-C, and the pick-up out of the dizzy (or at least the plug, and take note of which wire goes where on the pick-up). Provided there is nothing wrong with the module, it will work fine. It's what I had to do for a 2TGEU, and it works no prob, and I've also adapted a 2T-C dizzy to run electronic ignition on a TA22 LT.
|
|
|
Location:
Gold Coast
Registered:
January 2003
|
|
Re: 18rg ignition
|
Sat, 17 May 2003 06:29
|
|
|
i have complete dizzy, coil and ignitor out of a 22re $100 plus postage if your interested.
|
|
|
Location:
brisbane
Registered:
March 2003
|
|
Re: 18rg ignition
|
Sat, 17 May 2003 09:36
|
|
will the dizzy fit into the 18rg housing and work? i live in brisbane so i could prolly drive down if i want it..
do you pics of them?
|
|
|
Location:
Gold Coast
Registered:
January 2003
|
|
Re: 18rg ignition
|
Sat, 17 May 2003 10:16
|
|
|
sorry i dont have and pics of them. The coil and ignitor are in working order as i used it to test something on Blaze's celica the other week and spark was fine.
|
|
|
Location:
brisbane
Registered:
March 2003
|
|
Re: 18rg ignition
|
Sun, 18 May 2003 00:27
|
|
|
ok but will the 22r dizzy fit into the 18rg and works?
|
|
|
Location:
Gold Coast
Registered:
January 2003
|
|
Re: 18rg ignition
|
Sun, 18 May 2003 10:51
|
|
|
that is something i am currently uncertain of - whether the dizzy will fit straight in or mods are required. i would have to match the dizzies up to each other
|
|
|
Location:
brisbane
Registered:
March 2003
|
|
Re: 18rg ignition
|
Sun, 18 May 2003 10:56
|
|
|
ok cheers.
|
|
|
Location:
Brisbane
Registered:
December 2002
|
|
|
