| Author | Topic |
|---|
Location:
Sydney, Au
Registered:
May 2003
|
|
F/S 340cc Injectors high impedence
|
Sun, 25 May 2003 23:58
|
 |
Injectors are from a Mazda BP 1.8 Turbo
injectors will bolt on to 4AFTE Starlet GT 1.3L engine.
So if any1 else knows that the starlet injectors are the same as any other imodel of Toyota then it will certainly suit it.
Asking for $150 for all 4.
|
|
|
Location:
Sydney, Au
Registered:
May 2003
|
|
Re: F/S 340cc Injectors high impedence
|
Tue, 22 July 2003 06:46
|
|
|
bump
|
|
|
Registered:
June 2002
|
|
Re: F/S 340cc Injectors high impedence
|
Tue, 22 July 2003 07:14
|
|
|
Are these barbed injectors?
|
|
|
Location:
Sydney, Au
Registered:
May 2003
|
|
Re: F/S 340cc Injectors high impedence
|
Tue, 22 July 2003 07:19
|
|
As far as I know they are
Top fed and has the harness as well so it can click into a loom of the same sort.
What do you mean by barbed.
|
|
|
Registered:
June 2002
|
|
Re: F/S 340cc Injectors high impedence
|
Tue, 22 July 2003 09:13
|
|
GTR-90D,
by barbed I mean do your injectors sit in the fuel rail with an oring or are the conected to the rail via a piece of fuel tubing.
I have been told that the familia injectors are of the latter design and therfore would be appopriate to my application. If they are the latter it means the injector is brabed and the fuel tubing sits on the brabed fitting. I hope this explains it enough for you to check them out. If they are barbed the only oring fitting will be on the nozzel.
Roger
|
|
|
Location:
Sydney, Au
Registered:
May 2003
|
|
Re: F/S 340cc Injectors high impedence
|
Tue, 22 July 2003 23:19
|
|
Ok I know what you mean. Its barbed top fed and is o-ring design.
|
|
|
Location:
Sydney, Au
Registered:
May 2003
|
|
Re: F/S 340cc Injectors high impedence
|
Mon, 10 November 2003 05:59
|
|
I have another set of injectors for sale
same price
$150
As well as 4agze supercharger kit
includes
ECU
intake manifold + supercharger
intercooler
$300
|
|
|
