| Author | Topic |
|---|
Location:
Sydney
Registered:
April 2003
|
|
Exhaust Advice for Seca SX
|
Tue, 03 June 2003 05:14
|
 |
Hi Guys
Looking to get a cat-back exhaust for my 91 Corolla Seca SX (4AGE 100KW). I rang around to get a few quotes today.
$280 for a 2" sports system
$320 for a 2.25" sports system
both systems include a 4" chrome dump pipe at the rear and fitting.
The engine is completely stock except for a K&N Filter. I have had differing opinions about the size I should use on the car. I know the 2.25" system will give more sound but is necessarily better for the car? I want to hopefully gain some power rather than loose power.
Any opinions/suggestions would be greatly appreciated.
|
|
|
Location:
Sydney
Registered:
May 2003
|
|
Re: Exhaust Advice for Seca SX
|
Tue, 03 June 2003 14:15
|
|
mate 2.25 is what i got all the way in my seca sx as well as hurricane exhaust headers hi flow cat and mandril bent piping with a 2.5 inlet and 4" outlet cannon for $1000 on my car iam now running the 4AGZE motor in it but the exhaust went well on the old 100kw motor 
|
|
|
I supported Toymods
Location:
Sutho/Hills NSW
Registered:
September 2002
|
|
Re: Exhaust Advice for Seca SX
|
Tue, 03 June 2003 14:32
|
|
|
2" would be fine, im getn a new 2" mandrel fitted to my 20v which should be plenty.
|
|
|
I supported Toymods
Location:
south of the big smoke
Registered:
May 2002
|
|
Re: Exhaust Advice for Seca SX
|
Tue, 03 June 2003 14:41
|
|
i wouldnt go any bigger that 2 if i was you on a NA 4 cylinder
its plenty big enuff
|
|
|
Location:
Sydney
Registered:
April 2003
|
|
Re: Exhaust Advice for Seca SX
|
Wed, 04 June 2003 13:21
|
|
FLYNSX
Is a 2.25inch system quite loud? Don't want to get defected for the exhuast being too loud. But I enjoy the sound of a deep sounding exhaust system. The system that will be installed is made by Redback (mild steel) - 1 muffler with 1 resonator.
Will I be loosing power by going 2.25 inch? Hopefully I will be converting to a 4AGZE motor later down the track but in the mean time I want the engine to be making more power with more sound.
|
|
|
Location:
Sydney
Registered:
May 2003
|
|
Re: Exhaust Advice for Seca SX
|
Wed, 04 June 2003 13:27
|
|
|
well from my experience it is perfect and i got the hole exhaust enginerred as well 87 db's @ 3500rpm
|
|
|
