| Author | Topic |
|---|
Location:
Brisbane
Registered:
January 2003
|
|
AE86 rebuild (friend)
|
Tue, 03 June 2003 06:51
|
 |
hey guys my friend is looking at doing an ae86 build.
just thought i would ask what your thoughts are.
there are a few ideas he has...
3s-ge with gt25/35
blacktop naturally/asperated
silvertop n/a
sr20 det again gt25/35
any feed back would be handy.
thankz rena.
|
|
|
Location:
camden
Registered:
July 2002
|
|
Re: AE86 rebuild (friend)
|
Tue, 03 June 2003 10:50
|
|
|
gze bottom end with 20v head, t3-4 turbo boosted to 15psi should be good for 300hp... just ask tony rigoli performance, they built the fastest fwd in australia but then sold it but they pulled 405hp at 18psi i think.... so its a good combination..
|
|
|
Location:
GoldCoast/Brisbane
Registered:
May 2002
|
|
Re: AE86 rebuild (friend)
|
Tue, 03 June 2003 14:46
|
|
Ahhhhhh hahahahahahhaaaa!!!
Just for a little bit of input.....
a. Make sure he has plenty money and OVERBUDGETS and I really mean overbudget!!
b. Make sure he can drive first!! 
And the most important one of them all.....
c. Remember kids..... it is very very VERY easy to overpower the AE86 chassis!!
I can keep on going on but I will shit you to tears for sure!
|
|
|
Location:
Melbourne
Registered:
September 2002
|
|
Re: AE86 rebuild (friend)
|
Wed, 04 June 2003 06:24
|
|
I personally like the idea of....
* GEN III 3S-GTE
* W58 Surpa Box
* Full whiteline suspension
* 4 Point Roll cage
* Carbon fiber racing seats w/ harneses
* R31 Skyline diff + brakes w/ KAAZ LSD Center
* Celica GT4 Brakes up front with 4 Pot calipers
* 16x7" rims with fat some sticky rubber  Esp on the rear.
And some seam welding + urithane filled chassis (door rails and stuff, adds about 45% strengh apparently)...
There is of course plenty of little niggly things but that should make for a reasonably quick car ;p
|
|
|
Location:
Sydney
Registered:
May 2002
|
|
Re: AE86 rebuild (friend)
|
Wed, 04 June 2003 06:51
|
|
get rid of the whiteline suspension
DMS or Bilstein all the way, if you are going that far...
Ben
AE86 Trueno 4AGE
|
|
|
Location:
Melbourne
Registered:
September 2002
|
|
Re: AE86 rebuild (friend)
|
Wed, 04 June 2003 07:07
|
|
DMS or Blistein for just springs/shocks or for swaybars etc too...
Be a little more specific ;p I was going for the polyurithane bushes + swaybars etc... but was a little unsure as to the suitability of the whiteline spring + koni shock combo? i.e. stiffness...
|
|
|
I supported Toymods
Location:
sydney.au
Registered:
August 2002
|
|
Re: AE86 rebuild (friend)
|
Wed, 04 June 2003 11:25
|
|
stick with toyota engines
sr20's are powerful but you can overpower the chassis as speedie says
3sgte would fit > but only just
to make it fit you need to move the engine mounts forward and over the fornt wheels, destroying the natural balance of the AE86
although id go with a blacktop or a 100KW 4age with the works
silvertops are weak and 86kw bluetops are OK but 100kw's are better
if your hell bent on forced induction maybe try a 4agte (a GZE with turbo instead of supercharger)
as shcao would say
ROCKON!
|
|
|
Location:
GoldCoast/Brisbane
Registered:
May 2002
|
 Re: AE86 rebuild (friend)
|
Wed, 04 June 2003 14:24
|
|
| ae86drift wrote on Wed, 04 June 2003 21:25 |
stick with toyota engines
sr20's are powerful but you can overpower the chassis as speedie says
|
|
|
|
I supported Toymods
Location:
sydney.au
Registered:
August 2002
|
|
Re: AE86 rebuild (friend)
|
Wed, 04 June 2003 14:56
|
|
GEE i WONDER whos putting an SR20 into his SPRINTER
haha
jeez man could you be more obvious?
|
|
|
Club Member
Location:
sydney
Registered:
May 2002
|
|
Re: AE86 rebuild (friend)
|
Thu, 05 June 2003 06:07
|
|
|
personally if i was to do another project AE86 i would use a gen III 3SGE a 3S turbo is too powerfull (IMHO) for a AE86 chasis (they have enough problems keeping the GT4 chasis together in the rally cars) a small set of cams in the 3S would give more than enough useable power
|
|
|
Location:
Melbourne
Registered:
September 2002
|
|
Re: AE86 rebuild (friend)
|
Thu, 05 June 2003 06:17
|
|
|
What makes you think that you need to move the engine mounts forward to mount the motor?
|
|
|
Location:
brisbane queensland
Registered:
January 2003
|
|
Re: AE86 rebuild (friend)
|
Thu, 05 June 2003 07:04
|
|
hey i was also thinking a 3sge naturally/asperated
u know pistons,head,carbies the works what u think.
??? rena
|
|
|
