Toymods Car Club Inc: Tech & Conversions => 1JZ-GTE diagnostic connector pin-outs

Toymods Car Club
www.toymods.org.au

Toymods » Tech & Conversions » 1JZ-GTE diagnostic connector pin-outs Show: Today's Posts :: Show Polls Email to friend

Author

Topic

SkiDMaN
Regular

Location:
Gold Coast
Registered:
June 2002

1JZ-GTE diagnostic connector pin-outs	Fri, 06 June 2003 10:55

can any one tell me which pin-out i can plug the tacho into so i can get a rpm reading? the ppl who did my conversion have plugged it into the wrong spot.. and it just jumps all over the place... btw its a auto meter tacho thanks [Report message to a moderator]

celicamad
Forums Junkie

Location:
newcastle
Registered:
June 2002

Re: 1JZ-GTE diagnostic connector pin-outs	Fri, 06 June 2003 11:29

AHHHH yes that annoying tacho problem the problem is the output from the 1j is not suitable for many normal tachos your guys have done the right job . Mine did the same .then i fitted a tacho converter from sixworks .works fine you can contact him here sixworks@optusnet.com.au [Report message to a moderator]

draven
Forums Junkie

I supported Toymods

Location:
Epping, Sydney
Registered:
May 2002

Re: 1JZ-GTE diagnostic connector pin-outs	Fri, 06 June 2003 11:40

yeps.. you'll probably need a tacaho signal convertor. joys of the microtech... standard a/m tacho output [Report message to a moderator]

sideshow
Forums Junkie

Location:
sydney
Registered:
March 2003

Re: 1JZ-GTE diagnostic connector pin-outs	Fri, 06 June 2003 11:54

ive used at tacho booster from sixworks on a 1jz in a supra and it worked ok no probs with it [Report message to a moderator]

Previous Topic:	7AFE extractor?
Next Topic:	KE70 Wagon Diff options

Current Time: Sat Feb 1 06:59:15 UTC 2025

Total time taken to generate the page: 0.0086371898651123 seconds

.:: Contact :: Home ::.