| Author | Topic |
|---|
Location:
The Eastwood MASSIVE !
Registered:
May 2003
|
|
12 Pin dash connector
|
Tue, 24 June 2003 05:51
|
 |
Any one got one?
I could really use it.
|
|
|
Location:
Hornsby, N.S.W
Registered:
September 2002
|
|
Re: 12 Pin dash connector
|
Tue, 24 June 2003 21:01
|
|
i think everyone has got one, but for what car would you be looking for one???
justin
|
|
|
Location:
The Eastwood MASSIVE !
Registered:
May 2003
|
|
Re: 12 Pin dash connector
|
Wed, 25 June 2003 04:17
|
|
|
Whoops , change that to a 12 pin dash connector for a AE92 SX , I don't really care what car it comes from as long as it works for my application.
|
|
|
Location:
Torquay, Vic
Registered:
April 2003
|
|
Re: 12 Pin dash connector
|
Wed, 25 June 2003 11:40
|
|
i have all the loom-to-dash conncetors, and other connectors off a 91-95 mazda mx5.. if you can find out if they are the same, you can 'ave em'
|
|
|
Location:
Hornsby, N.S.W
Registered:
September 2002
|
|
Re: 12 Pin dash connector
|
Wed, 25 June 2003 11:54
|
|
now that makes more sence!!!
justin 
|
|
|
Location:
The Eastwood MASSIVE !
Registered:
May 2003
|
|
Re: 12 Pin dash connector
|
Wed, 25 June 2003 12:14
|
|
| Garageaholic wrote on Wed, 25 June 2003 21:40 |
i have all the loom-to-dash conncetors, and other connectors off a 91-95 mazda mx5.. if you can find out if they are the same, you can 'ave em'
|
What shape are they?
|
|
|
Location:
Menai area of Sydney
Registered:
June 2003
|
|
|
Location:
The Eastwood MASSIVE !
Registered:
May 2003
|
|
|
Location:
Menai area of Sydney
Registered:
June 2003
|
|
Re: 12 Pin dash connector
|
Thu, 26 June 2003 10:16
|
|
|
Could be a couple of weeks yet. Just started pulling the loom out of the Twinky to compare it to the hatch. There's a lot of wire in there. If I can transfer the loom over and still use the hatch with the carby for a while, I can do that first. Should only need some of the EFI's connectors but I don't know if there's enough there to run carby. Anybody know if I can use an EFI loom with a carby engine ?
|
|
|
I supported Toymods
Location:
south of the big smoke
Registered:
May 2002
|
|
Re: 12 Pin dash connector
|
Sat, 28 June 2003 04:53
|
|
scorps: the body loom is seperate to the engine loom, you shouldnt need the body loom unless you are transfering the cluster over,
what ever ya do dont cut the engine loom,
|
|
|
Location:
Menai area of Sydney
Registered:
June 2003
|
|
Re: 12 Pin dash connector
|
Sat, 28 June 2003 09:34
|
|
|
I've got the dash out and the loom coonnects the instrument cluster to the computer and then on into the engine bay with all the efi do-dads in there. I haven't found a break in the loom yet but I have to pull the blower out to see if anything happens near the firewall. I am swapping the cluster over but I don't think that's the problem. I was hoping that the computer would be an add-on to the loom but so far it's all continuous. I'll get a chance tomorrow afternoon to pursue it further.
|
|
|
Location:
West Sydney
Registered:
February 2003
|
|
Re: 12 Pin dash connector
|
Mon, 14 July 2003 09:52
|
|
I have one from An AE82....
Mick
micbod@sydcruise.com
0412166686
|
|
|
