| Author | Topic |
|---|
Location:
Kita-Ku, Sapporo, Japan
Registered:
January 2003
|
|
With PICS.....Toyota 2R NEW Federal Mogul pistons... now only $35??
|
Fri, 04 July 2003 04:32
|
 |
Update...
they cost me $40 and that's all i'm asking for.... they make snazzy paperweights 
anyone?
Hey all,
i have a set of brand spankin new Sterling/Federal Mogul pistons for sale.
i only have pistons and pins... no rings.
these are the specs i know
for toyota 2R motor, 1.0mm oversize (i think this is mk1 corona?)
skirt diameter is 79mm, crown diameter is 78mm
ring thickness is 2mm, 2.5mm, 4mm (1st 2nd oil)
they look to have a fairly thick crown and they weigh approx 330gms each, and pins weigh about 80gms each.
i can provide accurate weights as i have access to good scales at uni  , and could also probably balance them for free too.
i've been told they go for around $300 new, but i'm open to offers.
these pistons are new in box and are still shiny 
if anyone is interested, pm or call me on 0410 677 857. also lemme know if you know of anyone who might be interested.
i was hoping to use these in my K motor, but i'm not too keen on a 120 thou bore in a 4K i might still use em depending on pin height n diameters.... hmmmm
anyhoo, i'll bring them to the dyno day for looksees...
Cya, Stewart
ps, and i'm around Newtown if anyone wants to take a look
[Updated on: Mon, 18 August 2003 03:55]
|
|
|
Location:
Kita-Ku, Sapporo, Japan
Registered:
January 2003
|
|
Re: Toyota 2R NEW Federal Mogul pistons
|
Fri, 04 July 2003 15:31
|
|
also pin diameter is 20mm (same as 1G?) and pin height is 39mm (from pin center)
is anyone out there building a 2R??
Cya, Stewart
|
|
|
Location:
Kita-Ku, Sapporo, Japan
Registered:
January 2003
|
|
Re: Toyota 2R NEW Federal Mogul pistons
|
Sun, 06 July 2003 11:20
|
|
*bump* for the new super low price 
|
|
|
Location:
Hobart, Tas
Registered:
May 2002
|
|
Re: Toyota 2R NEW Federal Mogul pistons... only $40??
|
Sun, 06 July 2003 13:03
|
|
|
Any idea if they are the same as 22R? Prob not, but if they are...
|
|
|
Location:
Kita-Ku, Sapporo, Japan
Registered:
January 2003
|
|
Re: Toyota 2R NEW Federal Mogul pistons... only $40??
|
Tue, 08 July 2003 05:26
|
|
i doubt they'd fit a 22R, but you can check the bore size of the 22 and see. the specs for the pistons are listed above.
Cya, Stewart
|
|
|
I supported Toymods
Location:
I renounced punctuation
Registered:
May 2002
|
|
Re: Toyota 2R NEW Federal Mogul pistons... only $40??
|
Tue, 08 July 2003 06:20
|
|
Funnily enough, I know someone who might just be interested in these.
Now if they were 3R pistons, I'd buy them without even questioning.
|
|
|
Location:
adelaide
Registered:
May 2002
|
|
Re: Toyota 2R NEW Federal Mogul pistons... only $40??
|
Wed, 09 July 2003 04:10
|
|
| gianttomato wrote on Tue, 08 July 2003 15:50 |
Funnily enough, I know someone who might just be interested in these.
Now if they were 3R pistons, I'd buy them without even questioning.
|
GT what vehicle had the 3R motor? what is so special about it? or just it's rarity?
Any '3K-R type' 3R-R race engines made in the 70's that u know of?
|
|
|
I supported Toymods
Location:
I renounced punctuation
Registered:
May 2002
|
|
Re: Toyota 2R NEW Federal Mogul pistons... only $40??
|
Wed, 09 July 2003 07:50
|
|
|
1960-1967 Crowns had them - I know someone who collects them. He'd have snapped up a set of 3R pistons in a sec. They definitely arent a performance motor, but they are hard to find now because they are 40 years old.
|
|
|
Location:
adelaide
Registered:
May 2002
|
|
Re: Toyota 2R NEW Federal Mogul pistons... only $40??
|
Fri, 11 July 2003 03:17
|
|
|
for sure, cheers 4 the info
|
|
|
Location:
Kita-Ku, Sapporo, Japan
Registered:
January 2003
|
|
Re: Toyota 2R NEW Federal Mogul pistons... only $40?? with pics
|
Wed, 23 July 2003 02:28
|
|
oki, have a couple of pics to bump.
nice and shiny, would make good paperweights, make an offer
Cya, Stewart
|
|
|
Location:
Kita-Ku, Sapporo, Japan
Registered:
January 2003
|
|
Re: Toyota 2R NEW Federal Mogul pistons... only $40?? with pics
|
Mon, 18 August 2003 03:58
|
|
anyone know anyone that might want these??? only being sold cheap because i got told wrong part numbers when i bought em...
gotta go, as they will just collect dust at my place
Cya, Stewart
|
|
|
Location:
Seattle area, USA
Registered:
June 2002
|
|
Re: Toyota 2R NEW Federal Mogul pistons... only $40??
|
Tue, 23 September 2003 05:19
|
|
| oldcorollas wrote on Tue, 08 July 2003 15:26 |
i doubt they'd fit a 22R, but you can check the bore size of the 22 and see. the specs for the pistons are listed above.
Cya, Stewart
|
22R is 92mm bore std.
wrist pin is .866", 2.95" long. i believe.
|
|
|
Location:
Melbourne
Registered:
August 2003
|
|
Re: Toyota 2R NEW Federal Mogul pistons... only $40??
|
Tue, 23 September 2003 09:20
|
|
| gianttomato wrote on Wed, 09 July 2003 17:50 |
1960-1967 Crowns had them - I know someone who collects them. He'd have snapped up a set of 3R pistons in a sec. They definitely arent a performance motor, but they are hard to find now because they are 40 years old.
|
Don't suppose that collector lives in Mt. Waverley?
|
|
|
