| Author | Topic |
|---|
Location:
Melbourne
Registered:
September 2002
|
|
Clutch for AE86 w/ 4A-GE
|
Mon, 07 July 2003 00:13
|
 |
Hey Guys,
Im putting a 4A-GE into my sprinter very soon and i just collecting all the parts im going to need ;p One of which is a new clutch for the T50 gearbox....
What sort of clutch would last but take a bit of a abuse too? What are the rest of you guys using?
|
|
|
Location:
Brisbane / Gold Coast
Registered:
May 2002
|
|
Re: Clutch for AE86 w/ 4A-GE
|
Mon, 07 July 2003 01:29
|
|
|
I use(d) a stock one with little problems for nearly ten years, though they do tend to wear out with hard use faster than a stronger one. After 80,000kms it was just starting to slip.
|
|
|
Toymods Board Member
I supported Toymods
Location:
Turramurra, Sydney.
Registered:
May 2002
|
|
Re: Clutch for AE86 w/ 4A-GE
|
Mon, 07 July 2003 02:28
|
|
Quite a while back I replaced my clutch with a PBR RPM clutch kit, which was really just a slightly heavy duty clutch, & it was fantastic for a relatively mild 4AGE, it is not overly heavy & puts up with quite a hard time with no complaint.
It cost me $240 for pressure plate, clutch plate & new thrust bearing.
|
|
|
