Toymods Car Club
www.toymods.org.au
F.A.Q. F.A.Q.    Register Register    Login Login    Home Home
Members Members    Search Search
Toymods » Tech & Conversions » 5M-GE problems

Show: Today's Posts  :: Show Polls 
Email to friend 
Switch to threaded view of this topic Create a new topic Submit Reply
AuthorTopic
marlowmk2
Occasional Poster


Location:
Nashville, Tennessee, USA
Registered:
June 2003
 
5M-GE problems Wed, 23 July 2003 02:14 Go to next message
im looking for some help with my 1983 2.8L 5MGE Supra, i've rebuilt the engine with an 82 block, 85 head, and 83 electronics and intake, ive been having problem starting it, i figured out it was getting no fuel due to bad wiring to the injectors, so i wiring in some wires from another harness (possibly from another year, though i bought it thinking it was for an 83)but it still wouldnt start, so on a whim i changed the AFM from the 83 to an 82 AFM (which i pretty sure shouldnt work at all) and it started?!?! But it ran REALLY bad and had no throttle response, so i found out i had the wrong AFM, tested the 83 and found it to be bad, so i got another one (im certain its from an 83 which ran before the guy sold it to me) and still nothing, i have checked the timing over 15 times, and everything else should be good because it ran, but with the wrong AFM! Next im going to get another 83 ECU and try it, and maybe even another complete 83 wiring harness, Anybody have any ideas? thanks in advance
  Send a private message to this user    
marlowmk2
Occasional Poster


Location:
Nashville, Tennessee, USA
Registered:
June 2003
 
Re: 5M-GE problems Wed, 23 July 2003 20:54 Go to previous messageGo to next message
everybody just as stumped as me eh?
  Send a private message to this user    
Norbie
Forums Junkie


Location:
Brisbane
Registered:
May 2002
Re: 5M-GE problems Thu, 24 July 2003 00:58 Go to previous messageGo to next message
So are you currently using the ECU, AFM and wiring from the same model Supra?
  Send a private message to this user    
marlowmk2
Occasional Poster


Location:
Nashville, Tennessee, USA
Registered:
June 2003
 
Re: 5M-GE problems Thu, 24 July 2003 23:19 Go to previous messageGo to next message
i think so, what is the part nmber for an 83 ECU, or would it be different here in the states?
  Send a private message to this user    
Norbie
Forums Junkie


Location:
Brisbane
Registered:
May 2002
Re: 5M-GE problems Thu, 24 July 2003 23:37 Go to previous messageGo to next message
It's probably different due to emissions requirements etc. We never had the 5M-GE that early; I think it arrived around 1986 in the MX73 Cressida. Aus-spec Supras never had a 5M-GE at all.
  Send a private message to this user    
gianttomato
Forums Junkie


I supported Toymods

Location:
I renounced punctuation
Registered:
May 2002
 
Re: 5M-GE problems Thu, 24 July 2003 23:49 Go to previous messageGo to next message
Like Norbie, I can't help but think that you have done something like a mix and match of bits. We only got the digital ECU 5MGEs in a Cressida....you guys and the Europeans got the early analogue ECUed 5MGEs as well as the digital ECUed ones.
  Send a private message to this user    
marlowmk2
Occasional Poster


Location:
Nashville, Tennessee, USA
Registered:
June 2003
 
Re: 5M-GE problems Fri, 25 July 2003 03:09 Go to previous message
yeah thats the only thing that i can think of too, thanks guys
  Send a private message to this user    
  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic:84/85 4 runner transmission?
Next Topic:st185 3sgte
Goto Forum:
-=] Back to Top [=-

Current Time: Sat Aug 2 13:23:32 UTC 2025

Total time taken to generate the page: 0.0051329135894775 seconds

Bandwidth utilization bar

.:: Contact :: Home ::.

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.