| Author | Topic |
|---|
Location:
Gold Coast
Registered:
June 2002
|
|
1JZ-GTE Turbos FS
|
Fri, 25 July 2003 10:28
|
 |
i have a set of 1jz turbos... one has a busted oil seal and chipped compressor wheel... other one is ok.... very slight movement...
comes with standard dump pipe and intake pipes with heat shield
both wastegates are good
offers?
pete
|
|
|
Location:
Sydney Australia
Registered:
May 2002
|
|
Re: 1JZ-GTE Turbos FS
|
Sat, 26 July 2003 07:53
|
|
|
$20
|
|
|
Location:
Gold Coast
Registered:
June 2002
|
|
Re: 1JZ-GTE Turbos FS
|
Sat, 26 July 2003 09:09
|
|
*cough*
im after a little more than that 
|
|
|
Location:
Newcastle
Registered:
May 2002
|
|
Re: 1JZ-GTE Turbos FS
|
Sat, 26 July 2003 11:50
|
|
Hmmm how about $50???
its more than $20!
Dave
|
|
|
Location:
Gold Coast
Registered:
June 2002
|
|
Re: 1JZ-GTE Turbos FS
|
Sat, 26 July 2003 13:50
|
|
hmm... maybe i worded my post wrong
i have a set of twins for sale
one of the turbos is dead
the other one is fine
so one good turbo... and one dead turbo
thanks
pete
|
|
|
Location:
Melbourne
Registered:
May 2002
|
|
Re: 1JZ-GTE Turbos FS
|
Sun, 27 July 2003 05:19
|
|
|
what are you after? i would mind pickin up a set of ct12a's to get hi-flowd so i don have my car off road. is the stuffed one in any condition that i could be 'hi-flowd' back to health?
|
|
|
Location:
Gold Coast
Registered:
June 2002
|
|
Re: 1JZ-GTE Turbos FS
|
Sun, 27 July 2003 05:24
|
|
not to sure...
the only thing wrong with it is a blown oil seal (oil leaking out the back on the exhaust housing and one fin on the exhaust wheel is half missing
im not to sure what parts are used when u hi flow.
|
|
|
Location:
Melbourne
Registered:
May 2002
|
|
Re: 1JZ-GTE Turbos FS
|
Sun, 27 July 2003 05:27
|
|
|
honestly me neither! I was hopin you'd know! if some one pipes up and says yeah that's hi-flowable i'm interested!
|
|
|
Location:
Brisbane
Registered:
May 2002
|
|
Re: 1JZ-GTE Turbos FS
|
Sun, 27 July 2003 05:27
|
|
"High flow" usually involves new wheels and sometimes machining the housings. The seals and bearings are usually replaced at the same time. So as long as the housings are undamaged and the shaft isn't bent, they should be fine for high-flowing.
|
|
|
Location:
Melbourne
Registered:
May 2002
|
|
Re: 1JZ-GTE Turbos FS
|
Sun, 27 July 2003 05:31
|
|
thats what i thought but i didn't wanna look like a tool if i was wrong!  so what are you honestly after for em?
|
|
|
Location:
Gold Coast
Registered:
June 2002
|
|
Re: 1JZ-GTE Turbos FS
|
Sun, 27 July 2003 05:33
|
|
well... then there good for that
but one is still in working condition
so make me a offer 
i know that they go for around 1100 for a pair in working order
but im not after no where near that much!
|
|
|
Location:
Melbourne
Registered:
May 2002
|
|
Re: 1JZ-GTE Turbos FS
|
Sun, 27 July 2003 05:37
|
|
|
hmmmm... donno... might not beable to afford em just yet then. thought they might be cheap! um, $150?
|
|
|
Location:
Gold Coast
Registered:
June 2002
|
|
Re: 1JZ-GTE Turbos FS
|
Sun, 27 July 2003 05:44
|
|
i was looking at around $500 for both
one is still in good condition... they are very hard to find.. thats why im selling them becuase i cant find another one to replace the stuffed one.. going single just seems the better option atm
|
|
|
Location:
_Sydney _
Registered:
May 2002
|
|
Re: 1JZ-GTE Turbos FS
|
Sun, 27 July 2003 08:38
|
|
are you willing to seperate the cast intake pipes? if so let me know
how much u want for them.
|
|
|
Location:
Gold Coast
Registered:
June 2002
|
|
Re: 1JZ-GTE Turbos FS
|
Sun, 27 July 2003 08:51
|
|
u mean the pipes that connect to the front of each turbo and joines to the filter?
if u mean them... possiable... the stock bov is taken and the person who bought the bov may be taking the pipes aswell...
how much u wanna offer me for them?
|
|
|
Location:
_Sydney _
Registered:
May 2002
|
|
Re: 1JZ-GTE Turbos FS
|
Sun, 27 July 2003 08:56
|
|
|
yeah those pipes, $60?
|
|
|
Location:
Gold Coast
Registered:
June 2002
|
|
Re: 1JZ-GTE Turbos FS
|
Sun, 27 July 2003 09:29
|
|
ok... then there urs
skid____man@hotmail.com
msn me and we can organise something
|
|
|
I supported Toymods
Location:
Epping, Sydney
Registered:
May 2002
|
|
Re: 1JZ-GTE Turbos FS
|
Sun, 27 July 2003 09:39
|
|
what sort of single are you going?
gt30?
|
|
|
Location:
Gold Coast
Registered:
June 2002
|
|
Re: 1JZ-GTE Turbos FS
|
Sun, 27 July 2003 09:41
|
|
|
custom built garrett... thats all im sayin
|
|
|
I supported Toymods
Location:
Epping, Sydney
Registered:
May 2002
|
|
Re: 1JZ-GTE Turbos FS
|
Sun, 27 July 2003 09:45
|
|
|
bastard
|
|
|
Location:
Gold Coast
Registered:
June 2002
|
|
Re: 1JZ-GTE Turbos FS
|
Sun, 27 July 2003 09:49
|
|
if it works out good i will give the specs of the turbo and i will be able to get more.... brand new
and there under $1500 
now... wheres that external wastegate going to fit
|
|
|
I supported Toymods
Location:
Epping, Sydney
Registered:
May 2002
|
|
Re: 1JZ-GTE Turbos FS
|
Sun, 27 July 2003 09:52
|
|
how soon are you expecting this info to be out?
ball bearing I assume?
what sort of max hp?
or do I have to wait for that info?
|
|
|
Location:
Gold Coast
Registered:
June 2002
|
|
Re: 1JZ-GTE Turbos FS
|
Sun, 27 July 2003 10:01
|
|
info in about 3 weeks once i get the turbo and do the manifold
and yes... ball bearing
and it should push around 35psi if need be... but thats crazy
and im only tuning for about 450-500hp... im sure it could be much more if the boost was higher.
i really have to sort out my stock rear end *gulp*
|
|
|
I supported Toymods
Location:
Epping, Sydney
Registered:
May 2002
|
|
Re: 1JZ-GTE Turbos FS
|
Sun, 27 July 2003 10:03
|
|
sweet
that figure is almost exactly what I'm after
get back to me when you hammer out some dsetails etc. I'm sure it'll work out cheaper if we can find a bunch of people to buy the manifold (as the expensive bit is getting the jig set up)
|
|
|
Location:
Gold Coast
Registered:
June 2002
|
|
Re: 1JZ-GTE Turbos FS
|
Sun, 27 July 2003 10:06
|
|
so true... i have a mate who owns his own metal crafting shop... so he is going to be helping me make something up. im sure i could get some good prices happening...
there needs to be more single turbo 1jz's out there.
|
|
|
Location:
Osama's hideout
Registered:
February 2003
|
|
Re: 1JZ-GTE Turbos FS
|
Mon, 28 July 2003 06:26
|
|
i dont think that kind of power will be achievable with that turbo, what size rear housing what trim wheel. front and back.
i looked at this turbo and the general consess i got from turbo shops was it wouldnt make 450 comfortably, they said the rear housing wouldnt flow enough air.
not knocking you dude just interested as this is the stage i am upto myself.
|
|
|
Location:
Gold Coast
Registered:
June 2002
|
|
Re: 1JZ-GTE Turbos FS
|
Mon, 28 July 2003 10:53
|
|
hmm... i havnt really said what turbo im using... ive just been talking over wheel sizes and stuff. the turbo all up converted to a smaller rear housing is going to cost around 1400
thanks
Pete
|
|
|
Location:
sunny coast, qld
Registered:
October 2002
|
|
Re: 1JZ-GTE Turbos FS
|
Mon, 28 July 2003 14:07
|
|
I would like to join this single turbo 1jz club in the near future too!
P.S good luck with the sale Skidman
|
|
|
Location:
Gold Coast
Registered:
June 2002
|
|
Re: 1JZ-GTE Turbos FS
|
Mon, 28 July 2003 14:11
|
|
hahaha yeah... im wishing myself luck atm 
$400 for one good ct12a turbo and one stuffed one with dump pipe
|
|
|
