| Author | Topic |
|---|
Location:
Canberra
Registered:
May 2002
|
 AE71 tailshaft- 1 or 2 piece?
|
Wed, 30 July 2003 10:10
|
 |
Is the tailshaft from an AE71 corolla (4AC) one or two piece?
Any ideas on the length of the shaft (or halves)??
I need to put an AE71 T50 into my T18, but the T18 tailshaft has the wrong splines for the box.
Thanks in advance.
Phil
|
|
|
Location:
melb
Registered:
May 2002
|
|
Re: AE71 tailshaft- 1 or 2 piece?
|
Wed, 30 July 2003 10:21
|
|
the diff is different in both.
ae71 = borgwarner light duty
te72 = T? seriers toyota
the housings on the diffs are different lengths
short answer is the ae71 shaft will NOT fit in TE72
|
|
|
Location:
melb
Registered:
May 2002
|
|
Re: AE71 tailshaft- 1 or 2 piece?
|
Wed, 30 July 2003 10:22
|
|
|
Oh yeah and the ae71 is 1 piece so you cannot adapt them
|
|
|
Location:
Canberra
Registered:
May 2002
|
|
Re: AE71 tailshaft- 1 or 2 piece?
|
Wed, 30 July 2003 10:24
|
|
BUT: If the AE71 is 2 piece, can the front section be used with the rear section of the T18 tailshaft? This is what i'm getting at....
So is the AE71 2 piece or not? 
cheers
|
|
|
Location:
melb
Registered:
May 2002
|
|
Re: AE71 tailshaft- 1 or 2 piece?
|
Wed, 30 July 2003 10:34
|
|
|
you replied to damn quick.
|
|
|
Location:
Canberra
Registered:
May 2002
|
|
Re: AE71 tailshaft- 1 or 2 piece?
|
Wed, 30 July 2003 10:41
|
|
Thankyou
If I can find out the total length of the AE71 shaft, maybe I can modify it to use the T18 diff flange.
|
|
|
Location:
Hornsby, N.S.W
Registered:
September 2002
|
|
Re: AE71 tailshaft- 1 or 2 piece?
|
Wed, 30 July 2003 13:16
|
|
thats a tidy looking 4agte you have to go into you t-18. 
if only you were in the market to give it to me 
|
|
|
Location:
Kita-Ku, Sapporo, Japan
Registered:
January 2003
|
|
Re: AE71 tailshaft- 1 or 2 piece?
|
Thu, 31 July 2003 07:35
|
|
| TE72_Turbo wrote on Wed, 30 July 2003 20:10 |
Is the tailshaft from an AE71 corolla (4AC) one or two piece?
Any ideas on the length of the shaft (or halves)??
I need to put an AE71 T50 into my T18, but the T18 tailshaft has the wrong splines for the box.
Thanks in advance.
Phil
|
the KE70 is definitely 2 piece and i'm pretty damn sure that the AE70 would be 2 piece as well (since they are same body, just different motor)
the T box and K box are same length so i'm pretty sure the shafts are same lengths too.
i have one at home but won't be able to measure it for a few weeks  i have the front shaft of a TE72, but no back half.
you could ask Michael Seymour, he was mucking around with Ke/AE70/AE86/TE7x tailshafts, for his AE7x rally car.
Cya,STewart
|
|
|
Location:
melb
Registered:
May 2002
|
|
Re: AE71 tailshaft- 1 or 2 piece?
|
Thu, 31 July 2003 12:30
|
|
it is 2 pieces but they are not detachable - ie it is constructed from 2 sections but you cannot unbolt the rear section from the front section like on the japanse versions.
the locally assembled stuff is very different to the jap stuff.
|
|
|
Location:
Canberra
Registered:
May 2002
|
|
Re: AE71 tailshaft- 1 or 2 piece?
|
Thu, 31 July 2003 12:35
|
|
bugger!
Is the tailshaft diameter still 2 1/2 inches? If so, i'd happily just cut the front yoke off and fit it to a T18 shaft.
|
|
|
Location:
Newcastle
Registered:
May 2002
|
|
Re: AE71 tailshaft- 1 or 2 piece?
|
Sun, 03 August 2003 01:32
|
|
|
can you just swap the yoke over?
|
|
|
Location:
Canberra
Registered:
May 2002
|
|
Re: AE71 tailshaft- 1 or 2 piece?
|
Sun, 03 August 2003 08:59
|
|
|
Yeah, i'm just trying to source one in the "Parts Wanted" section at the moment to see if they're a straight swap. I cant find a wrecker here in canberra that has an AE71 corolla. Reckon toyota would still stock them?
|
|
|
