Toymods Car Club Inc: Tech & Conversions => Cam Differences

Toymods Car Club
www.toymods.org.au

Toymods » Tech & Conversions » Cam Differences Show: Today's Posts :: Show Polls Email to friend

Author

Topic

Syc02T
Regular

Location:
Lake Macquarie
Registered:
July 2002

Cam Differences	Mon, 04 August 2003 02:53

Anyone know the differences (if any) between late 2tgeu and 3tgteu cams. Would there be any advantage in putting in the 3tgteu cams in a boosted 2tgeu, or is it better to get either (2t or 3t) of the cams reground to a better size. What cam profiles are good for turbos? [Report message to a moderator]

Syc02T
Regular

Location:
Lake Macquarie
Registered:
July 2002

Re: Cam Differences	Thu, 07 August 2003 02:21

Bump* [Report message to a moderator]

Steve M
Forums Junkie

Location:
Adelaide
Registered:
June 2003

Re: Cam Differences	Thu, 07 August 2003 05:05

For turbo you'll want a high-lift short-duration cam. There is a site that may go into the cam differences between the two, or at least state the durations. http://members.iinet.net.au/~jar1/2tg-info.html I only found three duration readings for 2tg camshafts. 248deg for the original 256 for 2nd gen and also fro 88262 244 (also for 88262) and none for the 3t gte hope this helps. [Report message to a moderator]

Steve M
Forums Junkie

Location:
Adelaide
Registered:
June 2003

Re: Cam Differences	Thu, 07 August 2003 05:05

oops, missed the 240degree for the 88262 [Report message to a moderator]

Previous Topic:	Question About 4AGZE Gearboxes?????? :)
Next Topic:	HELP !! GEAR WON'T ENGAGE

Current Time: Sat Nov 16 12:09:38 UTC 2024

Total time taken to generate the page: 0.0072579383850098 seconds

.:: Contact :: Home ::.