| Author | Topic |
|---|
Location:
Canberra
Registered:
May 2002
|
|
TA22 diff width
|
Tue, 09 July 2002 09:56
|
 |
Hey all
I need to know how wide a TA22 diff is from flange to flange.
Any help appreciated!
Cheers
Phil
|
|
|
I supported Toymods
Banned User
Location:
Brisbane
Registered:
May 2002
|
|
Re: TA22 diff width
|
Tue, 09 July 2002 10:01
|
|
|
If you can wait till tomorrow afternoon i'll crawl under my TA22 and measure the diff for you!
|
|
|
Location:
Canberra
Registered:
May 2002
|
|
Re: TA22 diff width
|
Tue, 09 July 2002 12:15
|
|
|
sure i can! thanks.
|
|
|
I supported Toymods
Banned User
Location:
Brisbane
Registered:
May 2002
|
|
Re: TA22 diff width
|
Tue, 09 July 2002 12:40
|
|
|
No problems mate! I'll do it first thing tomorrow afternoon when i get home from work.
|
|
|
Location:
Tasmania
Registered:
May 2002
|
|
Re: TA22 diff width
|
Tue, 09 July 2002 13:04
|
|
1233mm
is the width of a bare RA23 axle housing from flange to flange. Give or take 2mm. I use this in my KE55.
|
|
|
I supported Toymods
Banned User
Location:
Brisbane
Registered:
May 2002
|
|
Re: TA22 diff width
|
Tue, 09 July 2002 13:06
|
|
|
Well that should be the same as the TA22, but i will confirm!
|
|
|
Location:
Canberra
Registered:
May 2002
|
|
Re: TA22 diff width
|
Tue, 09 July 2002 13:15
|
|
ok, let me know.
cheers
|
|
|
I supported Toymods
Banned User
Location:
Brisbane
Registered:
May 2002
|
|
Re: TA22 diff width
|
Wed, 10 July 2002 07:43
|
|
I measured about the same! It was between 1220 and 1230mm
I hope that is good enough! Its damm hard to get a exact measurment while it is still fitted to the car.
|
|
|
Location:
Canberra
Registered:
May 2002
|
|
Re: TA22 diff width
|
Wed, 10 July 2002 13:19
|
|
thanks guys. Its seems the T18 is a little wider at about 1285mm.
Cheers
Phil
|
|
|
