| Author | Topic |
|---|
Location:
Parramatta
Registered:
July 2002
|
|
aw11 20v backtop questions
|
Fri, 22 August 2003 03:04
|
 |
just a few questions for u guys a mate would like to know the following
i know the mounts are the same but my questions are:
it will be the 6 speed are the drive shafts bigger then the hubs? so this will mean having to upgrade the hubs or whatelse can be done?
also does anything have to be cut for the bk top to fit into the bay ie the ae86 has to remove the dizzy... will any mods like this have to be carried out?!
also what would he best be getting a half cut or just the motor and box ecu and loom.... i know in most cases its best off gertting a half cut ie brakes etc but this is the aw11 its completly different setup.... ???
|
|
|
Location:
Sydney, OZ
Registered:
May 2002
|
|
Re: aw11 20v backtop questions
|
Fri, 22 August 2003 05:01
|
|
I don't exactly what difference there are is driveshafts between the AW11 and the AE101/AE111 rolla's, but the I know all the shafts from the 6-spd do fit the straight into the AE102/101 local model sold here, as I run this gearbox in the Rally car. The box itself is very similar to the standard C56 sold here, but with and extra gear added... very nice box too!!
Again not sure the rolla and MR2 differences, but the dizzy does sit at the back of the B/T engine (same a S/T 20V), but going into an MR2, this positions this above the gearbox, so it shouldn't be the way. Price's expect big money as the 6-spd alone, guys are asking $1500-2000, so $4500-5000 are the current prices for these engines... Also bear in mind the last generation of AE101 did come with this combo, especially the high luxo wagon
|
|
|
