| Author | Topic |
|---|
Location:
NSW
Registered:
May 2002
|
 Modifying Distributer: 1GGTE for sequential fire (MoTec)
|
Wed, 10 July 2002 09:48
|
 |
Hey out there....
This is a long shot but has anyone done this or know what is involved?? 1G's and 4A' fire their injectors in batches (from factory), but i need/want to change this to FULL SEQUENTIAL operation, as to make the most of the MoTec.
HELP ME!!!
|
|
|
Location:
melbourne
Registered:
May 2002
|
|
Re: Modifying Distributer: 1GGTE for sequential fire (MoTec)
|
Wed, 10 July 2002 11:24
|
|
|
what engine and what ecu have you got if it is a m48 it will run 6 cylinder but if you have m4 it will be batch fire ,using m48 just set the wires in firing order for the injectors and you will have sequential
|
|
|
Location:
NSW
Registered:
May 2002
|
|
Re: Modifying Distributer: 1GGTE for sequential fire (MoTec)
|
Thu, 11 July 2002 04:37
|
|
|
1GGTE fires in batches (double pole rotor button), and its an M48.....
|
|
|
Location:
melbourne
Registered:
May 2002
|
|
Re: Modifying Distributer: 1GGTE for sequential fire (MoTec)
|
Thu, 11 July 2002 07:03
|
|
|
if it has a double pole could you not cut 1 off to give sequential or ring motec they will tell you 03 9761 5050
|
|
|
Location:
Melbourne
Registered:
May 2002
|
|
Re: Modifying Distributer: 1GGTE for sequential fire (MoTec)
|
Thu, 11 July 2002 09:51
|
|
am i missing something here but what the hell does the rotor buttion have todo with the injectors?
Allan
|
|
|
Location:
melbourne
Registered:
May 2002
|
|
Re: Modifying Distributer: 1GGTE for sequential fire (MoTec)
|
Thu, 11 July 2002 11:52
|
|
|
your right allan i was right in the 1st place ,even my altezza engine and motec has sequential but i am still using wasted spark on the coils
|
|
|
