| Author | Topic |
|---|
Location:
Melbourne
Registered:
April 2003
|
|
FS: 16x7 alloys & 14x6 mesh Wheels 4 AE86
|
Sat, 23 August 2003 03:11
|
 |
Got 2 seats of wheels for sale,
16x7 Performance Alloys
4x114.3, come with crome wheel nuts
have bridgstone Potenza's, 2 are RW 2 are not,
no scarches marks or anything, they look like new,
$850
14x6? Gold Mesh wheels
pretty good condition, Not sure what tyres, but they got plenty of thread, no centers caps, and no wheel nuts
$450
had plans for the wheels, but money is starting to run out, will swap for any neccesary AE86 parts you may have....
 |
Attachment: 16wheels.jpg
(Size: 87.23KB, Downloaded 420 time(s)) |
[Updated on: Sat, 23 August 2003 03:14]
|
|
|
Registered:
May 2002
|
|
Re: FS: 16x7 alloys & 14x6 mesh Wheels 4 AE86
|
Sat, 23 August 2003 17:10
|
|
any chance u know if those top mags have the same stud pattern as a TA22, or will fit under the TA22 wheel arches?
cheers
|
|
|
Location:
sydney
Registered:
December 2002
|
|
Re: FS: 16x7 alloys & 14x6 mesh Wheels 4 AE86
|
Sat, 23 August 2003 23:53
|
|
|
what kinda parts are you in need of
|
|
|
Location:
adelaide
Registered:
April 2003
|
|
Re: FS: 16x7 alloys & 14x6 mesh Wheels 4 AE86
|
Sun, 24 August 2003 02:22
|
|
|
stud pattern is same as ta22 but offset may be another matter
|
|
|
Location:
Melbourne
Registered:
April 2003
|
|
Re: FS: 16x7 alloys & 14x6 mesh Wheels 4 AE86
|
Sun, 24 August 2003 06:15
|
|
Some parts needed are
LSD rear
Front lip and sideskirts
boss kit and 12 or 13inch steering wheel
short shifter for T50
extractors to suit RWD 4agze
2x bucket seats
suspension parts would be nice...
but if you got anything to offer in parts, just asked and i'll consider them....
INFERNO: wouldn't have clue about fitting to a ta22
|
|
|
Location:
Melbourne
Registered:
April 2003
|
|
Re: FS: 16x7 alloys & 14x6 mesh Wheels 4 AE86
|
Mon, 25 August 2003 11:55
|
|
|
someone buy these things, i want to get a front mount cooler for my new coming 4agze
|
|
|
Registered:
May 2002
|
|
Re: FS: 16x7 alloys & 14x6 mesh Wheels 4 AE86
|
Tue, 26 August 2003 03:48
|
|
I'm tempted...primarily by the 14s. Can you (or anyone else, for that matter) give me an idea of the max width tyre you could fit on those? Oh, and it would help if they'll bolt on to a KE70 Corolla (as I suspect they would).
If they can take reasonable rubber, they may make good track-work wheels...Of course, another sticking point may be the shipping to get them to the ACT...
I guess I need an idea of what I'd be up for all-up, including getting them here. If it's not too steep, I may be interested.
|
|
|
Registered:
May 2002
|
|
Re: FS: 16x7 alloys & 14x6 mesh Wheels 4 AE86
|
Tue, 26 August 2003 06:00
|
|
|
I would be interested in the 16s, but would have to be absolutely definate they will fit on a TA22 before i have them transported over here.
|
|
|
Location:
Melbourne
Registered:
April 2003
|
|
Re: FS: 16x7 alloys & 14x6 mesh Wheels 4 AE86
|
Wed, 27 August 2003 01:58
|
|
well the 16s, fitted on my 260z and my sprinter, so the offset must be lower than +17 for sure, and i'm guessing somewhere in the +10 mark, and have 4x114.3 so if you find out info for a ta22 and check it with that i'm sure you will find out if they fit
Everyone wants to ship the wheels, i don't even know a company that would ship the wheels, so if anyone knows please let me know
|
|
|
Location:
Lost in the K hole
Registered:
May 2002
|
|
Re: FS: 16x7 alloys & 14x6 mesh Wheels 4 AE86
|
Wed, 27 August 2003 03:20
|
|
can you measure a few things on the 16's for me?
'actual' distance from hub mounting face to the inside edge of the rim (ie back-spacing). OR if you can find out the actual offset, that'd be just as good.
AND
whats the smallest inside diameter of the rim at the following 2 points:
- about 1inch from the inside edge of the rim, and
- at the hub mouting face
AND
whst the centre hole dia (in the middle of the bolt circle)??
Cheers!
ed
|
|
|
Location:
Melbourne
Registered:
April 2003
|
|
Re: FS: 16x7 alloys & 14x6 mesh Wheels 4 AE86
|
Wed, 27 August 2003 06:10
|
|
offset is +11
Center hole is 7cm
and from the hub to the inner rim is 9 1/2 cm
|
|
|
Location:
Lost in the K hole
Registered:
May 2002
|
|
Re: FS: 16x7 alloys & 14x6 mesh Wheels 4 AE86
|
Wed, 27 August 2003 11:19
|
|
cool, thanks heaps.
would still be good if you could get me those inside diameters 
need to see if the suckers will fit over the big mofo brakes 
cheers
ed
|
|
|
