| Author | Topic |
|---|
Location:
Sydney
Registered:
August 2003
|
|
Two 3SGE Motors
|
Sat, 23 August 2003 04:53
|
 |
For Sale: 2 x 3SGE motors. One complete 3rd Series Motor and one 2nd Series in pieces. Motors are EX Osborne Production Racing MR2 units.
Both units have been balanced and blueprinted for racing but are standard for production racing rules.
Numerous spares including chipped standard computer and loom, 12 spare pistons and conrods (Used), ring sets, bearing sets, seals, etc.
I was going to use them for my Improved Production Celica but have changed my mind.
The whole lot $2,500.00
Don.
|
|
|
Location:
Sydney
Registered:
August 2003
|
|
Re: Two 3SGE Motors
|
Sun, 24 August 2003 00:02
|
|
Guys - No replys?
These motors have had all parts lifed and replaced after exceeding there operation hours (OK if you can afford It)
I will sell individual components, it would be ashame to pull apart a fully balanced motor, but the second unit is in pieces and some parts, such as pistons, water pumps, seals, etc are still in their original boxes.
Don't be afraid to ask I need the $$$ for improvements to the race car!!!!
Don
|
|
|
Location:
SYDNEY
Registered:
September 2002
|
|
Re: Two 3SGE Motors
|
Sun, 24 August 2003 00:09
|
|
|
are pistons, rods, cams all standard or aftermarket items. ie do youhave forged pistons??
|
|
|
Location:
Sydney
Registered:
August 2003
|
|
Re: Two 3SGE Motors
|
Sun, 24 August 2003 04:58
|
|
All parts are atandard, but the engines are both 150KW MR2 motors and with the chipped computer and other work the engines produce approx 160KW (210HP) Serious HP from a standard motor!
Don
|
|
|
Location:
Sydney
Registered:
July 2003
|
|
Re: Two 3SGE Motors
|
Sun, 24 August 2003 13:29
|
|
160KW? Damn. Could I drop one of these into my ST162? 
|
|
|
Location:
sydney
Registered:
April 2003
|
 Re: Two 3SGE Motors
|
Sun, 24 August 2003 13:55
|
|
|
yeah nice one! yeah i have a st162 how much for the single motors??????
|
|
|
Location:
Melbourne
Registered:
May 2002
|
|
Re: Two 3SGE Motors
|
Sun, 24 August 2003 22:25
|
|
don,
interested in ecu (ecu's?) if gen 3 maybe also loom. gen 3 gasket set too.
Do you happen to have any spare valve shims for gen3?
looking for gen3 secondary exhaust pipe too - sw20 one, not celica one.
ta
T
|
|
|
Location:
Tasmania
Registered:
January 2003
|
|
Re: Two 3SGE Motors
|
Mon, 25 August 2003 03:22
|
|
Sent you a pm on sunday night regarding chipped standard computer, just making sure you got it, waiting on a reply still.
cheers
nigel
|
|
|
Location:
Sydney
Registered:
August 2003
|
|
Re: Two 3SGE Motors
|
Mon, 25 August 2003 10:53
|
|
Single motor assembled $1000.00, single motor unassebled and missing valves and inlet manifold $750.00
Don
|
|
|
Location:
Sydney
Registered:
August 2003
|
|
Re: Two 3SGE Motors
|
Mon, 25 August 2003 10:58
|
|
T,
I am not up on all the 3SG bits and pieces, my race car is a RA23 using 18RG and these motors were going to be used for the conversion. If the secondary pipe is after the exhaust manifold I don't have one. Sorry
The ECU and loom price is $500.00
Don
|
|
|
Location:
Sydney
Registered:
August 2003
|
|
Re: Two 3SGE Motors
|
Mon, 25 August 2003 11:10
|
|
Sure would make a 162 sit up and sizzle.
Don
|
|
|
Location:
Epping, Sydney
Registered:
April 2003
|
|
Re: Two 3SGE Motors
|
Mon, 25 August 2003 12:00
|
|
oh MAN I wish I had an excuse to buy one and stick it in my car! I seriously do!
Why oh why is my current motor in good condition??!!!  Nigel, you KNOW that there is a shipload of parts coming your way, why not get me to bring a motor down in the back of my car as well  (not sure if it would fit come to think of it)
|
|
|
Registered:
June 2003
|
|
Re: Two 3SGE Motors
|
Mon, 25 August 2003 12:37
|
|
You coulda put them up for sale about a month ago.... too late now I've already replaced mine with a jap import one  go go no egr... whoops.... ahh.. what would vicroads know about an engine.
|
|
|
Location:
Melbourne
Registered:
August 2003
|
|
Re: Two 3SGE Motors
|
Mon, 25 August 2003 14:40
|
|
hey dons
how can i get in contact with u. im from melb and need a new engine 4 my st162 urgently.
|
|
|
Location:
Melbourne
Registered:
May 2002
|
|
Re: Two 3SGE Motors
|
Mon, 25 August 2003 22:38
|
|
hi dons,
could you please give me the part numbers on the loom and the ecu so i can check which gen they are.
mkchau i have a complete gen2 setup down here in melb.
ta
T
|
|
|
Location:
Glossodia,NSW
Registered:
May 2002
|
|
Re: Two 3SGE Motors
|
Tue, 26 August 2003 06:16
|
|
hi dons,
If your in the right place at the right time you often get what you want,and you have exactly what i want.I'm in sydney,got a 91mr2 sw20 and am looking for a good non-turbo engine(bloody insurance).So please give me some more details,i'm very interested,if it's what i'm after it's your lucky day.Which of the 2 engines you have is complete?Which engine does the chipped ecu go with?Any chance of organising a meet so i can have a look at what you have.I probably want the gen 2,cause that would be easier for me to swap over.
Toby
it's been awhile mate,got rid of my corolla and bought a non-turbo 91mr2.i'm very happy with it.With what dons has for sale could i swap this into my mr2,or are there too many differences between the generations of the sw20??
Cheers Adrian
|
|
|
Location:
Melbourne
Registered:
May 2002
|
|
Re: Two 3SGE Motors
|
Tue, 26 August 2003 08:30
|
|
adrian,
if the numbers on the loom and ecu match (i need them to see what they are), and are gen 3, and the loom is uncut, you could retrofit it inot your mr2 (i have a aw11 with a gen3 3sge in it) but the exhaust secondary is different. the gen 2 setup i have is the same as will be in your '91 car (gen 3 cam out post oct '93)
gen3 motor will probably run on the gen 2 ecu, but not as well as it would on the correct one!
T
|
|
|
Location:
Glossodia,NSW
Registered:
May 2002
|
|
Re: Two 3SGE Motors
|
Tue, 26 August 2003 09:19
|
|
|
So can i just swap the ecu or are the plugs different on the loom.Its a real hassle swapping looms over.Could i just get a set of ecu plugs to suit the gen3 ecu then find out what the pinouts are and match them up to the loom in my car??
|
|
|
Location:
Sydney
Registered:
August 2003
|
|
Re: Two 3SGE Motors
|
Wed, 27 August 2003 04:04
|
|
Mkchau
Have sent you a pm with contact details
|
|
|
Location:
Sydney
Registered:
August 2003
|
|
Re: Two 3SGE Motors
|
Wed, 27 August 2003 04:06
|
|
Toby,
Have sent you a pm re this. Call me
Don
|
|
|
Location:
melb
Registered:
August 2003
|
|
Re: Two 3SGE Motors
|
Wed, 27 August 2003 10:42
|
|
Don,
I e-mailed you this afternoon could you contact me with your phone number.Thanks paul
gem@alphalink.com.au
|
|
|
Location:
Melbourne
Registered:
May 2002
|
|
Re: Two 3SGE Motors
|
Wed, 27 August 2003 22:51
|
|
don
no pm recieved.
also do you happen to have the ignitor off one of the motors? looking for one with this part number: 89621-16020
adrian,
some plugs might be slightly different, but in practice can be made to fit. gen3 motor has all the same functionality of a gen2 (no extra vvt etc) so it may work.
T
|
|
|
Location:
Sydney
Registered:
August 2003
|
|
Re: Two 3SGE Motors
|
Thu, 28 August 2003 02:59
|
|
The questions are coming thick and fast. It may be easier to call or e-mail me.
Mobile 0412 558 559
Email bbretec@bigpond.net.au
The part number for the ECU is 175700-2322 (89661-17300) 3SG M/T but the loom doesnt have a number.
Don
|
|
|
Location:
Melbourne
Registered:
May 2002
|
|
Re: Two 3SGE Motors
|
Thu, 28 August 2003 22:41
|
|
that part number is for an aus delivered sw20 '89-91 ecu. it will not match the gen3 motor i'm afraid. odds are the loom will match the ecu (if the part number is there it will be down near the ecu connectors)
do you hve the igniter by any chance?
T
|
|
|
