| Author | Topic |
|---|
Formerly TRD_RoLLa
Registered:
May 2002
|
 URGENT - Need place in SE Syd which has lathe / skim 1mm off a pulley.
|
Wed, 27 August 2003 06:28
|
 |
URGENT !!!
Need car on the road.
I need to skim ~1mm off a water pump pulley, using a metal lathe.
Went to various places but have no lathe suitable. Only for brake rotors etc.
Needs to be in Sydney, S/E region prefered.
|
|
|
Location:
Kita-Ku, Sapporo, Japan
Registered:
January 2003
|
|
Re: URGENT - Need place in SE Syd which has lathe / skim 1mm off a pulley.
|
Wed, 27 August 2003 08:59
|
|
go asking around some proper engineering places...
if you have a spare water pump, pull the shaft out so you can bolt the pulley to it, and take that to the shop...
surely an engineering mob would have outside jaws on a chuck so they could do one side of the pulley at a time with no probs.....
let your fingers do the walkin 
Cya, Stewart
|
|
|
Formerly TRD_RoLLa
Registered:
May 2002
|
|
Re: URGENT - Need place in SE Syd which has lathe / skim 1mm off a pulley.
|
Thu, 28 August 2003 05:50
|
|
Its finished 
I ended up taking it to a Driveshaft Engineering workshop.
They were very helpful and obilging.
The car is now back on the road.
|
|
|
