| Author | Topic |
|---|
Location:
Perth, Western Australia
Registered:
June 2003
|
|
Wanted - 18R-G For RA40. Please!!!!! CMON!
|
Sun, 31 August 2003 15:02
|
 |
Hey, im looking for an 18r-G to replace the 18r-c in my current ra40. some of you may have seen my posts of my restoration, the Vermin ra40 celica. Well, yes i belive before its on the road i should put in an engine that can run on regular unleaded. And the 18r-g i belive can, plus its more powerful etc.
So please, if anyone has a front cut or bomb with an 18r-g in it. Im in W.A so be reasonable, some things are just impossible.
Im looking for an engine with all parts, alternator, starter motor's etc, so thats what im after
Thanks alot
Steve
|
|
|
I supported Toymods
Location:
Perth
Registered:
May 2002
|
|
Re: Wanted - 18R-G For RA40. Please!!!!! CMON!
|
Mon, 01 September 2003 00:07
|
|
|
Whats wrong with running the 18R-C on unleaded? It should run fine as well.
|
|
|
Location:
Perth
Registered:
November 2002
|
|
Re: Wanted - 18R-G For RA40. Please!!!!! CMON!
|
Mon, 01 September 2003 02:02
|
|
|
I've switched over to premium and could immediately notice the difference. I would suggest doing that for your 18r-c. I thought you where looking for a 1G?
|
|
|
Location:
Launceston, Tasmania
Registered:
May 2002
|
|
Re: Wanted - 18R-G For RA40. Please!!!!! CMON!
|
Mon, 01 September 2003 03:19
|
|
I seem to remember a while back that you said that you were going to keep the standard engine 
I think that the 18-RC and 18RG should both run on the same fuel type as they were releced over the same period of time. I have heard many times that unleaded is fine in an 18rc though i never tryed it while i had my celica.
|
|
|
Location:
Perth
Registered:
November 2002
|
|
Re: Wanted - 18R-G For RA40. Please!!!!! CMON!
|
Mon, 01 September 2003 05:08
|
|
|
I've heard people say they have lessened performace as LRP has a higher RON level then ULP.
|
|
|
I supported Toymods
Location:
Perth, Western Australia
Registered:
December 2002
|
|
Re: Wanted - 18R-G For RA40. Please!!!!! CMON!
|
Wed, 03 September 2003 07:00
|
|
|
try "sleekher" on this site?!
|
|
|
Location:
Perth WA
Registered:
August 2003
|
|
Re: Wanted - 18R-G For RA40. Please!!!!! CMON!
|
Wed, 03 September 2003 08:18
|
|
If you really want an 18rg there is one available from SON
IMPORTS ( I think thats thier name) in Wangara just near my place. I was there saturday. It is not in the best of condition but worth a look. You would have to negotiate a price as I think they want tooo much for it. Around 8 to 9 big ones. If you need to contact them I will look up their address and phone number for you. I have an 18rgu at home but unfortunately it is going in a ra28
Dave
|
|
|
Location:
brisbane
Registered:
August 2003
|
|
Re: Wanted - 18R-G For RA40. Please!!!!! CMON!
|
Sun, 07 September 2003 12:20
|
|
|
im running an 18rg with twin solex that i want to swap for a 3s-ge. im running on PULP but it will run on ULP. unfortunitly im in bris
|
|
|
