| Author | Topic |
|---|
Location:
sydney
Registered:
March 2003
|
|
coil n ignitor for 2tg
|
Thu, 04 September 2003 03:12
|
 |
hey all
im loookin for an ignitor and coil for a
2tg electronic dizzy with twin carbies
does anyone have any i can buy or does anyone know where i can get something to do the same job like of a different engine
maybe a 22r
|
|
|
Location:
MACKAY
Registered:
May 2002
|
|
Re: coil n ignitor for 2tg
|
Thu, 04 September 2003 11:14
|
|
The 4 pin Bosch igniter will work you can get one off a falcon dizy from the XD-XE it is on the side of the dizy under a cover , The pin s are numbered 3 , 7 , 15 , 16 the two wires from the dizy connect to 3 and 7 , connect ign power to 15 and positive coil and 16 goes to coil negative you can use any electronic ign coil or even non elec ign coil as I used an ordinary coil in this setup on my 2TG for about 12 years with no problems .
Trevor
|
|
|
Location:
sydney
Registered:
March 2003
|
|
Re: coil n ignitor for 2tg
|
Thu, 04 September 2003 11:36
|
|
thanks its for a rally car that will do 8000 all day
so need something good and reliable
ill give this a try
|
|
|
Location:
Gold Coast
Registered:
January 2003
|
|
Re: coil n ignitor for 2tg
|
Thu, 04 September 2003 12:18
|
|
|
the body of those bgosch ignition modules need to be earthed out too and heat transfer paste should be applyed.
|
|
|
Club President
I supported Toymods
Location:
Sydney
Registered:
May 2002
|
|
Re: coil n ignitor for 2tg
|
Thu, 04 September 2003 12:21
|
|
Sideshow,
A 22RE coil and ignitor works a treat !
|
|
|
Toymods Social Secretary
Location:
Sydney
Registered:
July 2002
|
|
Re: coil n ignitor for 2tg
|
Fri, 05 September 2003 00:10
|
|
Cheaper and usually far easier to come by (from my experience) is the 21R-C coil+ignitor. Exactly the same as the 22R-E!
It's what im using on my 18R-G combined with an 18R/22R-E hybrid dizzy.
|
|
|
