Toymods Car Club
www.toymods.org.au
F.A.Q. F.A.Q.    Register Register    Login Login    Home Home
Members Members    Search Search
Toymods » Tech & Conversions » Turbo timer installation

Show: Today's Posts  :: Show Polls 
Email to friend 
Switch to threaded view of this topic Create a new topic Submit Reply
AuthorTopic
HooN
Regular


Location:
The Rainy City
Registered:
May 2002
Turbo timer installation Sat, 13 July 2002 00:19 Go to next message
Hi guys.

I found out that my car actually has an old analogue HKS turbo timer! Smile
problem is, it gets power, as in the leds light up when i press the buttons, but it doesnt work. Now it has three wires, what do i connect the third to, assuming the other two are power?

would i be able to put this into the immobiliser system i wonder?
The third wire is green btw, if it helps hehe.

Cheers
  Send a private message to this user    
RA23_Sean
Regular


Location:
Western Sydney
Registered:
May 2002
 
Re: Turbo timer installation Sun, 14 July 2002 05:08 Go to previous message
Green sounds like it might be ACC. Are your others blue and red? Red will be B+ and green will be the IG+. If it's not working, check where the blue wire is connected. Should be on the main ignition wire from the ignition switch.

[Updated on: Sun, 14 July 2002 05:09]

  Send a private message to this user    
  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic:RA40 conversion possibilities
Next Topic:dizzy diaphram 2tgeu
Goto Forum:
-=] Back to Top [=-

Current Time: Wed Jul 23 07:11:46 UTC 2025

Total time taken to generate the page: 0.011388063430786 seconds

Bandwidth utilization bar

.:: Contact :: Home ::.

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.