| Author | Topic |
|---|
Location:
Lost in the K hole
Registered:
May 2002
|
|
18r valves
|
Sat, 13 July 2002 13:30
|
 |
am after some valves out of an 18r.
36mm exhaust.
43mm inlet.
am just plying with sizing so even just one of each would be fine.
if youve got 6 new of each, even better!!
cheers
ed
|
|
|
Location:
Lost in the K hole
Registered:
May 2002
|
|
Re: 18r valves
|
Tue, 16 July 2002 11:53
|
|
bump
|
|
|
I supported Toymods
Location:
Oyster bay NSW
Registered:
May 2002
|
|
|
Location:
Canberra
Registered:
May 2002
|
|
Re: 18r valves
|
Thu, 18 July 2002 03:05
|
|
Ed,
I have a (semi) complete 18R.
$50 and it is yours.
|
|
|
Location:
Lost in the K hole
Registered:
May 2002
|
|
Re: 18r valves
|
Thu, 18 July 2002 04:23
|
|
hehehe...
but ive gotta drive to canberra to get it yeah 
dont suppose you could simply rip the valves out of the head and send them to me could you phil? 
also, how much you want for that 5m flywheel and ecu?
hehehe...you'd love to see that 5m at the moment: completely disassembled on the workshop floor 
pity though, i cant use practically any of it. its been bored too much, and the bottom end bearings were all wayyyy dead and deeply scored the crank. OH, might have a reason for you as to why it kept doing the head in: the water pump has MAJOR casting faults making the pump impellar virtually useless. 
cheers
ed
|
|
|
I supported Toymods
Location:
I renounced punctuation
Registered:
May 2002
|
|
Re: 18r valves
|
Thu, 18 July 2002 05:24
|
|
|
Ed I can get you a set of valves (well 8 anyway!) from pick a part next week some time. Not sure how much just yet.
|
|
|
Location:
Lost in the K hole
Registered:
May 2002
|
|
Re: 18r valves
|
Thu, 18 July 2002 07:16
|
|
dave, please dont go to any hassle. use your free time wisely! (ie not pulling a head of an 18rc)
if it comes to it, i too can find a wreckers and go pull a head apart. im just lazy and if someone has got some *just lying there* well, it'd be a crime not to take them.
if, on the otherhad you have a deep seeded desire to flee the house and bury ones self in a car at the wreckers, who am i to stop you? but please, dont spend too much of my money?!
hell, i dont even know what valves cost, but if theyre going to be more than say $20 dont bother.
(or am i being unreasonable)
cheers
ed
|
|
|
I supported Toymods
Location:
Berowra-Sydney
Registered:
July 2002
|
|
Re: 18r valves
|
Mon, 22 July 2002 01:12
|
|
|
i have an 18-RC engine sitting in the back yard only problem was it was getting close to needing a new timing chain except its been sitting in the back yard with the rocker cover off but if you just need parts like valves i recjon they would clean up alright
|
|
|
Location:
Lost in the K hole
Registered:
May 2002
|
|
Re: 18r valves
|
Mon, 22 July 2002 12:58
|
|
dont worry about it mate, but thanks anyway...
slight change in plan
ed
|
|
|
