| Author | Topic |
|---|
Registered:
July 2002
|
|
4agze conversion ae82 87 rola
|
Tue, 16 July 2002 02:57
|
 |
will it fit in or will i need to do some mods?
where can i pick up a cheap halfcut?
i will probly b geting rid of the s/c and fit a t/c to the 4agze caus i dont think its worth the hasel of trying to twin charge.....
would any1 b able 2 giv me a ruff estimate on wat sort of $$$$ im looking at to complete this conversion all up.... the front cut, converting s/c to t/c, and any aftermarket acesories i mite need along the way...
and also any problems i will have to overcome?
doing the conversion myself by the way
cheers...
|
|
|
I supported Toymods
Location:
Sydney
Registered:
May 2002
|
|
Re: 4agze conversion ae82 87 rola
|
Tue, 16 July 2002 11:32
|
|
it will fit but really really tight!
ive seen one of the toymods guy white sx and the its really tight! you'll need to mod your bonnet unless you get it front mount then you'll need to hack away with that..
half cuts would be 2.4k-2.8?
if you have a GE already it shouldnt be to much of a hassle
if you have 4ac.. your gonna have problems.. 
|
|
|
Location:
Taree, 4h nth of syd
Registered:
May 2002
|
|
Re: 4agze conversion ae82 87 rola
|
Wed, 17 July 2002 13:29
|
|
hey there, ihave done this to my vehicale  
if u have the 4age in the vehicale, it will be alittle easyer, if u have the 4ac engine in her like i did, u will have to put the efi tank in it and a bigger feed line( use the origanl feed line as your return) i put the ae 101 gze into my girl, she fits nicely, i left it supercharged as i personally think super is better then turbo ( but thats personally)
my half cut was $3000 from sss
i did all the work myself at home, it toke me 4.5weeks, thats fabricating the bonnet, painting it and adapting the dash 
if u need any info, just give us a bell
Eddie
(Darola)
|
|
|
